Miscellaneous stuff found on ebay

[Wobbly]

Just trawling around...

YZ/WR motard wheelset incl braking caliper and some sort of m/c (http://cgi.ebay.com.au/Super-motard-wheels-YZ-WR_W0QQitemZ200008953797QQihZ010QQcategoryZ35233QQ rdZ1QQcmdZViewItem)

Another YZ/WR wheelset with caliper bracket (http://cgi.ebay.com.au/Super-Motard-Kit-Complete-Suit-All-Yamaha-WR-YZ-98-06_W0QQitemZ260009488017QQihZ016QQcategoryZ35233QQ rdZ1QQcmdZViewItem)

RMZ/KXF250 motard wheelset (http://cgi.ebay.com.au/supermotard-motard-wheels-for-rmz250-kxf250_W0QQitemZ300008116608QQihZ020QQcategoryZ352 32QQrdZ1QQcmdZViewItem)

Sportsbike brand tyre warmers in tard size (http://cgi.ebay.com.au/Super-Motard-Tyre-Warmers_W0QQitemZ4643146128QQihZ002QQcategoryZ3262 8QQrdZ1QQcmdZViewItem)

The Berg sibbo should buy (http://cgi.ebay.com.au/husaberg-fs650e-supermoto-supermotard_W0QQitemZ190007840257QQihZ009QQcategor yZ32625QQrdZ1QQcmdZViewItem)

The CR500 sibbo has been talking about for years (http://cgi.ebay.com.au/Honda-CR500-Motard-Beast-heaps-of-spares_W0QQitemZ280007747692QQihZ018QQcategoryZ102 675QQrdZ1QQcmdZViewItem)

The WR426 sibbo should end up getting (http://cgi.ebay.com.au/2001-WR426-w-EVERYTHING-Inc-Motard-gear-and-Road-Reg_W0QQitemZ160008800459QQihZ006QQcategoryZ102679 QQrdZ1QQcmdZViewItem)

:)

[jakestein]

Thats Corey's Berg.

Been ridden very easy!!!!

Some warranty left too :D

[Muzzard]

Didnt last long did it Jake?
Whats the deal?
Hasnt he got big enough goolies to hang onto the beast? ;)

[Sibbo]

Chatted to the guy selling the CR5, he said it was a good bike, but its not road reg, so no good for me.

The WR426 is a rip off and the Berg is er....I would rather spend the extra few $ and go new....unless Corey is willing to neg on $.

[jakestein]

You would get the berg for 8grand.

He is prolly looking towards a new wr 07 model.(really wants dirt wheels)

That and maybe a update on the Buell aswell,not sure what is drippping in his head sometimes!!


His money not mine :)

[Sibbo]

So when is a good weekend to go to Echuca and ride the WR and berg? This weekend is out, as I am riding a cr500E, so it will be good to compare the 3.

[Flash]

Sibbo might actually buy a bike!!:blob:

[Sibbo]

Dont get too excited, it is me remember.

[Flash]

Very true!! :lol:

[77]

Window shopping is a feminine trait! :lol: :oops:


Are you sure those boobs aint yours? :D

[Sibbo]

Got a demo lined up on a wr450 tard from my friends at clipstone. Do you think I am actually going to buy it from them? Or just ring its neck and have fun?

[Flash]

Ummmm. :roll:

[jakestein]

Just remember!!!!

Add 10 percent across the power range once you add a vortex ignition! no matter how good/bad it feels.

Having a wheels that you can use on both your yami's will be cool as ......

Maybe two weekends from now we can sort something out?????

[Muzzard]

You would have to be the only person to call Clipstones 'friends' Sibbo... :roll:

[Sibbo]

Maybe two weekends from now we can sort something out?????

So the 5 -6 of Aug?

[Tom]

Add 10 percent across the power range once you add a vortex ignition! no matter how good/bad it feels.

Jeez i hope you're right, the XR is off getting a vortex and lightened flywheel at the moment, i'll put it on the dyno again after i get it back to confirm. But an Extra 10% should give me over 63hp at the rear wheel :shock: Who needs a V twin!!!

Tom.

[77]

Add 10 percent across the power range once you add a vortex ignition! no matter how good/bad it feels.

Jeez i hope you're right, the XR is off getting a vortex and lightened flywheel at the moment, i'll put it on the dyno again after i get it back to confirm. But an Extra 10% should give me over 63hp at the rear wheel :shock: Who needs a V twin!!!

Tom.

5 HP + by putting on a Vortex ignition, seems a little hopeful to me.

I'll eat my hat :lol: :lol:

60 HP from an XR seems like a lot. What have you done to it? Not being a smartass, just very curious.

[Tom]

60 HP from an XR seems like a lot. What have you done to it? Not being a smartass, just very curious.

It's a long way from your standard XR, it's got an HRC powerup kit (piston, cam, timing sprocket, plug, needle, clutch springs jets, blah blah), exhaust, headers, filter and air box cutouts.

It's been on the dyno and got 57.5hp @7000rpm and 47.5Nm @5000rpm

I'll put it on the dyno when i get it back (same place to make sure it's a fair comparrison). I'd love to see if all the hype about Vortex ignitions is true or not.

[Sibbo]

Only 57 rwhp! WOW!!!!

It is the 650, not the old 600??

[Tom]

yeah 650r.

[Harry525]

Farrrk! That's some serious mumbo! Does anyone else have dyno figures for their bikes?

[SM93]

i can't find a dyno that can cope with the power of my husky :lol: seriously :lol:

[Sibbo]

No dyno operator wants my YZ in their shop, something about it covering the place in oil!!!

[Wobbly]

Then stop going to "pete's koala sanctury and bike dyno" then :snigger:

[Wobbly]

drz exhaust ... doesn't look like it includes the header pipe, meaning not much performance gain, just weight saving...

http://cgi.ebay.com.au/Yoshimura-Exhaust-For-DRZ-400_W0QQitemZ280011905803QQihZ018QQcategoryZ102678 QQrdZ1QQcmdZViewItem

[77]

drz exhaust ... doesn't look like it includes the header pipe, meaning not much performance gain, just weight saving...

http://cgi.ebay.com.au/Yoshimura-Exhaust-For-DRZ-400_W0QQitemZ280011905803QQihZ018QQcategoryZ102678 QQrdZ1QQcmdZViewItem

You wouldn't by chance know approximately what a header pipe is worth?

By the way how is the DRZ rebuild going?

[Tom]

Got the XR back today. Initial reports are Vortex = good.

Not confident on the 10% across the rev range claim, but definately an increase in power, definately smoother power delivery, and it might be the lightened flywheel but the throttle response is much much better now. Turn that throttle on in 1st, 2nd or 3rd gear and the front wheel is in the air, no lag, no bogging, just power on :) .

An added bonus i didn't think about is that my rev limiter has been raised from 7,500rpm to 9,750rpm. Which means my new top speed should be around the 210kph mark :D (according to my hi tech excel spread sheet, gotta love techies that make that stuff and post it on the net for free)

So, as soon as funds permit i'm off to the dyno to check the results for certain. I'm guessing 60 to 63rwhp. :D :shock: :D

I love this bike. I hope it doesn't blow up :(

[Wobbly]

You wouldn't by chance know approximately what a header pipe is worth?

By the way how is the DRZ rebuild going?

The header only comes as part of the full system as I believe that the diameters are different. You can make up your own of course from the dimensions of it (I can work these out if you need).

DRZ rebuild going slowly :)

http://vsmr.net/albums/drzrebuild2/drz_motor_bench.jpg

[77]

So if you crush the header Yoshi can't help? Does this system just fit into the original header or do you reckon that he has damaged the header and it will required one to be fabricated. Sorry for the questions Neil. I have asked the guy on EBay but he has not responded. ( and I am impatient, especially since my muffler is damaged).

Your DRZ engine looks sad and lonely...........abandoned! Mind you it would be hard to get motivated about fixing the old DRZ when you have a new Husky. Still don't miss the DRZ?

[77]

Neil I noticed that you have a manual cam chain tensioner. I take it that you don't trust the original. I have the Auto one on mine and have been thinking about installing the manual one, although maybe my model DRZ has a different type of tensioner (05 model). What are your thoughts?

[Wobbly]

Not sure about the header bit - you may be able to order the part from yoshi but it will only fit the full system is what I should have said, because the diameters between the slip-on and full system are different. Just ask him what the diameter of the pipe is and I can tell you which it is.

I have plans for the drz. Can't say what they are yet, but suffice to say it will be more than interesting... :!:

The cam tensioner on the drz is a well know problem, but I think from memory that the 05 tensioner is OK and hasn't had recorded failures. Mine is a 2k1 model and they had known tensioner problems, as did the hyabusas of the year which share the same tensioner design. I like manual cam tensioners though as they put less strain on your cam chain (no spring tension preloading) and very rarely need adjustment anyway...

[jakestein]

Got the XR back today. Initial reports are Vortex = good.

Not confident on the 10% across the rev range claim, but definately an increase in power, definately smoother power delivery, and it might be the lightened flywheel but the throttle response is much much better now. Turn that throttle on in 1st, 2nd or 3rd gear and the front wheel is in the air, no lag, no bogging, just power on :) .

An added bonus i didn't think about is that my rev limiter has been raised from 7,500rpm to 9,750rpm. Which means my new top speed should be around the 210kph mark :D (according to my hi tech excel spread sheet, gotta love techies that make that stuff and post it on the net for free)

So, as soon as funds permit i'm off to the dyno to check the results for certain. I'm guessing 60 to 63rwhp. :D :shock: :D

I love this bike. I hope it doesn't blow up :(

Was talking about the WR only, I would say a standard xr you would see those results but not a hotted up one.

My 1st ride after installing, it seemed to rev forever and some :)

[Harry525]

Neil, it looks like you got the motor out then went to bed?

[Wobbly]

Pretty much :lol2:

[Wobbly]

Mmmmm :lick:

http://cgi.ebay.com.au/Genuine-Yamaha-GYT-R-Full-Motard-Clamp-Kit_W0QQitemZ330013716357QQihZ014QQcategoryZ35233Q QrdZ1QQcmdZViewItem

[Wobbly]

Cast wheels to fit husky :)

http://cgi.ebay.com.au/Supermotard-Wheels-for-Husqvarna_W0QQitemZ270014537370QQihZ017QQcategoryZ 29705QQrdZ1QQcmdZViewItem

[Flash]

Heres another
http://cgi.ebay.com.au/yamaha-YZWR250-450-supermoto-brake-by-Beringer-the-best_W0QQitemZ300014100034QQihZ020QQcategoryZ35233 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Wobbly]

Someone up in new south should give this a crack :)

http://cgi.ebay.com.au/VOR-503SM-2000-Model-Supermotard-Good-Condition_W0QQitemZ270022906509QQihZ017QQcategoryZ 29705QQrdZ1QQcmdZViewItem

[Muzzard]

The VOR is in damn good condition and anyone looking for a real good Factory styled motard should check this out.
All new bike buyers too for that matter.
Good spares backup for VOR's. I tested for the VOR Team in 2001, and have a fairly good knowledge of them.
I can tell you the bikes ride really well, are superfast with only tweaking from whats already there, and although I think this baby is kick only are reliable from what I have seen.

[Muzzard]

Heres some more stuff;
http://cgi.ebay.com.au/KTM-SUPER-MOTARD-WHEELS-BRAKES_W0QQitemZ200022188382QQihZ010QQcategoryZ102 677QQrdZ1QQcmdZViewItem

CRF480
http://cgi.ebay.com.au/honda-crf-480-motard_W0QQitemZ130021220987QQihZ003QQcategoryZ102 675QQrdZ1QQcmdZViewItem

LC4 Enduro
http://cgi.ebay.com.au/KTM-LC4-640-1999-MODEL-WITH-MOTARD-ENDURO-RIMS_W0QQitemZ290023721955QQihZ019QQcategoryZ10267 7QQrdZ1QQcmdZViewItem

Cheap mags look like set up for Honda.
http://cgi.ebay.com.au/SUPER-MOTARD-WHEELS-COMPLETE_W0QQitemZ170025075634QQihZ007QQcategoryZ3 5230QQrdZ1QQcmdZViewItem

Ash mobile without the Factory scratches...
http://cgi.ebay.com.au/HUSQVARNA-SMR-450-SUPER-MOTARD_W0QQitemZ150027392727QQihZ005QQcategoryZ320 74QQrdZ1QQcmdZViewItem

KTM wheels and guard
http://cgi.ebay.com.au/KTM-supermotard-wheels_W0QQitemZ150026850114QQihZ005QQcategoryZ297 05QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Sweet XR 600 (USA, worth a look though)
http://cgi.ebay.com/ebaymotors/Honda-XR-Honda-XR-600-Supermoto-Motard-Supermotard-KTM-SMC-DRZ_W0QQcmdZViewItemQQcategoryZ50012QQihZ012QQitem Z220021184665QQrdZ1QQsspagenameZWD2V

[Flash]

What a poof, that motard is way too clean! I bet he's never put it on an MX track or been to the bush!!




Your allow to have a clean bike Muzz your not a poof and you use it on the dirt!!!

OK guys whose up for a little dirt in the next month or so? (or are you guys poofs as well!!)

Me and Muzz are waiting (and maybe Sibbo as well!)

[Muzzard]

Neat Supermoto suit from Shift..
Cheap too...
http://cgi.ebay.com/ebaymotors/SHIFT-1pc-Leather-Suit-Supermotard-SuperMoto-Black_W0QQcmdZViewItemQQcategoryZ6750QQihZ006QQite mZ160023523993QQrdZ1QQsspagenameZWD2V

[SMC690]

Those KTM wheels and brake set look awesome, they will fetch a packet.
I even chucked in a bid for good measure. Too many days to go though.
I have a 16mm radial sitting aside for fitment with a custom short articulated (fold-up) lever. ASV C5 clutch lever for the magura hydraulic clutch m/cyl (break it every day for 5 years and they will giveu a new one). I have a top spec brembo calliper put away and one of the KTM Hard E race wave discs coming too. I got the billet case for the Veypor VR2 today.
What the fuck is wrong with me? Why can I never leave anything stock?
I might need to go see a doctor, lol
Shit, forgot to mention the mods to the number plate and the rear section and conversion to mainly balc except the shrouds.....
Um, err, and the surflex slipper clutch.

Just call me man with empty wallet from now on. :D

[Muzzard]

Looking forward to a 990 to do those sort of things too.
I reckon the Titanium colour scheme and nicoshine wheels and brake carriers, the nice Akropovic slip on set from KTM H/E, and the seat cowl, and a few other bits in C/F will be on the cards. ;)

Bling is good 8)

[SMC690]

Stop it, your giving me a chubby with all the blinged up Superduke talk.
I think you need to come pay me a visit at work. :)
Have you seen the new full titanium Akropovic Evo system with Ti can's and hex carbon end caps?
If I had a 990 I'd go that system but it's frigging pricey.
I can even hack you a custom map that we can upload and get flamidge out the back of the pipes just like mine. :P

[Muzzard]

I'd be a starter straight away for the remap and pipes...
Its just money mate.
'How fast do you wanna go, How much do you wanna spend?'

[SMC690]

How true.
There are several diffent pipes available from Staintune, Several diff. Akros, Wings and maybe even Termi's.
I'd re-map it for nada.
That GSXR 7/12 in the gallery cost me $25,000 to do plus my labour.
150 neddies on the dynobike dyno done by my late friend Steve H.
Close ratio RR box, at 120 on the freeway you could drop down to second, flick the clutch and fuck off on the back wheel.
And some chick came along, hand me c**t struck and I sold it to buy her a ring.
I shoud be shot.
Or at least come last all the time.

[Muzzard]

You can put the Staintunes where the sun wont shine on them...
Akro's or Termi's but I would consider Arrow.

[SMC690]

That would also be my suggestion with the staintunes, I saw a set on a Superduke the other day, fugly as and they sounded pathetic. (Baffles in).

Termi (if avail.). Akropovic or Arrow is the go as you said. :)

[Muzzard]

And heres one for Sibbo...
Berg parts catalogue and workshop manual...
http://cgi.ebay.com.au/HUSABERG-1989-2005-WORKSHOP-PARTS-MANUALS-ON-CD_W0QQitemZ250021596622QQihZ015QQcategoryZ36609QQ tcZphotoQQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[SMC690]

VOR 503SM 2k model.

http://cgi.ebay.com.au/VOR-503SM-2000-Model-Supermotard-Good-Condition_W0QQitemZ270022906509QQihZ017QQcategoryZ 29705QQrdZ1QQcmdZViewItem

[SMC690]

Maxxis tard tyres:

http://search.ebay.com.au/_W0QQsassZmic_996QQhtZ-1

[sprint666]

now I have always had a soft spot for a VOR, and I have a job in Sydney this week,I can see the divorce papers being filled out already...............

[SMC690]

I'll be filling out both a contract of sale and divorce papers at the same time if I ever find a Husky NOX for sale!!! ;)

[SMC690]

SMR450:
http://cgi.ebay.com.au/HUSQVARNA-SMR-450-SUPER-MOTARD_W0QQitemZ150027392727QQihZ005QQcategoryZ320 74QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[SMC690]

Cheap TE610 twin mufflers off early model:
http://cgi.ebay.com.au/Husqvarna-TE-610-Husky-mufflers-and-pipe_W0QQitemZ330022944038QQihZ014QQcategoryZ29705 QQrdZ1QQcmdZViewItem

[SMC690]

15 tooth, apparently new Husky sprocket currently at $1.75. :)
http://cgi.ebay.com.au/HUSQVARNA-15-TOOTH-FRONT-SPROCKET_W0QQitemZ120025798763QQihZ002QQcategoryZ2 9705QQrdZ1QQcmdZViewItem

[Muzzard]

Check out this bad boy for the front of the SMC Justin... :twisted:
http://cgi.ebay.com.au/KTM-SUPERMOTARD-PARAFAGO-ANTERIORE-CARBONIO-CARBON_W0QQitemZ250024123930QQihZ015QQcategoryZ256 30QQrdZ1QQcmdZViewItem

[Muzzard]

Bling... :D
http://cgi.ebay.com.au/Ruote-Supermotard-kit-Wheels-Supermoto-rims-Braking_W0QQitemZ190025472317QQihZ009QQcategoryZ21 666QQrdZ1QQcmdZViewItem

[Muzzard]

Spares Neil?
http://cgi.ebay.com.au/Husqvarna-610-SM-SuperMotard-no-Ktm-Honda-Suzuki-TM_W0QQitemZ300022743644QQihZ020QQcategoryZ134712Q QrdZ1QQcmdZViewItem

[Muzzard]

Here's another good product...
http://cgi.ebay.com/ebaymotors/SUPERMOTO-CARBON-TUBELESS-KIT-17_W0QQcmdZViewItemQQcategoryZ34284QQihZ010QQitemZ 200021050560QQrdZ1

[Flash]

What is it, just a tape that seals the rim?

[Wobbly]

Yeah basically, kevlar banding of sorts and some stuff to seal the nipply bits ;)

[Muzzard]

This one I think is C/F reinforced Kevlar like Neil said.
There are advantages to it at premium competition level but just expensive for the average joe...

[SMC690]

Check out this bad boy for the front of the SMC Justin... :twisted:
Edit out link

Nice carbon guard, pitty they moulded of an Enduro EXC/SX guard.
And not the pointy SM guard. :(

I am already in discussions with a pommy firm for a little bit of the C/F for the SMC. :)

[SMC690]

Flash as a rat with a golden tooth.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ih=010&item=200022188382&rd=1&sspagename=STRK%3AMEBI%3AIT&rd=1

Nice setup. :)

[Tom]

PLEASE SOMEBODY BUY THIS. . .

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=270022906509&ssPageName=ADME:B:WNA:AU:12

only 2 hours left and going for $4,000. If i had the money i'd buy it as a second bike for stunt practice or just to say i had 2 tards.

But seriously, deals this good don't come around very often.

[Muzzard]

Anybody want my WRF so I can have this mint looking VOR...
Surely out there someone is looking for a motard and a friggin' cheap one that goes :twisted: ...

[Sibbo]

I was........

[Muzzard]

With the current economic climate, you would think someone at Yamaha would have taken the plunge at the scooter/first rider/commuter market here with this offering by now...
http://cgi.ebay.com.au/Yamaha-DT-50-Supermotard-50-c-c-2-tempi_W0QQitemZ160027075356QQihZ006QQcategoryZ9809 QQrdZ1QQcmdZViewItem

[Muzzard]

That mint looking VOR went for $4000...
Would have to be the cheapest motards around, cant buy the wheels, pipe and brake set up for that! :lol:
Good on you whoever bought that one ;) ...

[Muzzard]

Really nice pair of XR650 wheels on genuine hubs. ;)
Spoke with the owner and they are in mint condition used infrequently due to lack of time.
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=120027782247&sspagename=ADME:L:RTQ:AU:1

Current price @ 8/9 1900hrs, very good ;) .

[Muzzard]

KTM for the enthused...
http://cgi.ebay.com/ebaymotors/KTM-610SMR-AMA-Race-Winning-2005-KTM-610-SMR-Supermoto_W0QQcmdZViewItemQQcategoryZ6711QQihZ010Q QitemZ200024782262QQrdZ1

One for Justin...
http://cgi.ebay.com.au/KTM-motor-supermoto-factory-710-ccm-replica-620-640-660_W0QQitemZ280026116017QQihZ018QQcategoryZ135797 QQrdZ1QQcmdZViewItem

http://cgi.ebay.com.au/KTM-Supermoto-Racing-Swing-arm-swingarm-schwinge_W0QQitemZ280025603409QQihZ018QQcategoryZ1 08833QQrdZ1QQcmdZViewItem

[SMC690]

Muz you will send me broke.

I babelfished the 710cc donk:

Item Specifics

Condition: Used

This translation is provided as A service eBay CAN emergency guarantee its accuracy. View Item Specifics in original LANGUAGE.

here it concerns one ktm 710 ccm engine with a run achievement of ca.900km strassenbetrieb(seit itself the change) the engine all 400 km new oil and filter got.

with this engine one does not need to make any more any working on was there already as standard equipment made and the engine around the 85ps brings

the achievement is brachial and with nothing to compare-comparing who notion of it has white which such an engine worked on costs

scope of supply is engine as in the picture to see with zyndung ganghebel and gear wheel

small statement of cost

ktm big bore cylinders with high speed forging piston (105mm) ca.1500€

specially crankshaft with 84mm stroke and carillo pleul and fine-heaved approx. 1000€

including crankshaft bearing lubrication drillings and cylinder breaking open on 105mm increased worked on engine halves

treatment of cylinder heads for 105mm piston with increased valves and inlet channel treatment

new clutch with stronger fit with springs

the engine originates originally from the Slovenian supermoto championship and by a running team was developed.

smaller:bei the cylinder foot seal (aluminum) sweats minimum to oil out what however no influence on the function exercises

dispatch weldweit collection possible

Here still another reference in own thing: To your information and information: The Federal High Court (BGH) decided that obligatory sales contracts also in an InterNet auction "by mouse-click take place" can. For you this means that also you commit yourselves irrevocablly the ersteigerte commodity to the auction price here required from you to decrease! The return, transformation or conversion of ersteigerter articles are impossible. The new your-genuinly plans a one year's guarantee/warranty also with gebrauchtwaren. This may not be for a dealer portable or attached, however under any circumstances for a private salesman. The consequence from this regulation meanwhile often stand in no reasonable relation to the obtained purchase price. Consider please the following terms of sale: Please you place their questions before delivery of a requirement!!! The article "like that as it is sold" of private, that means: with the delivery of a requirement, you explain yourselves expressly in agreement to do without you after new your-genuinly legally which is entitled the guarantee/warranty with gebrauchtwaren completely. The articles are offered to any adhesion and guarantee under exclusion. Do not offer, if you do not agree with these rules. A Nachverhandlung is not accepted. Inspection before delivery of a requirement is nearly at any time possible and also desired.

[Muzzard]

Yeah, Yeah Justin, but if you put that motor in an SMC frame and then fit that 200 wide sheet alloy stiffened and shortened swingarm, couple it up to your sweet tunes...
Then you gots yaself a motard! :twisted:

Mate it would make the ground shake, spit fire, and eat them other red thingys like clickin' ya fingers... :shock

[SMC690]

Oh yeah, that swing-arm is sweet BUT did you see the price?!?!?
Holy snapping duck shite.
I could have a spec'd up Polini pocket bike for that. :)

[Muzzard]

If I get set up again here soon,
I'll build you one the exactly same for half the price ;) ...

Polini?
Jeez Justin,
Once again, come and see me and we can build a one off frame on the bench and fit it with a 24HP 165cc Chinese laydown motor and flat slide.
Real mini motard, look a bit like the Metrakit :roll: for that same sum..

[Wobbly]

That metrakit thing looked awesome :)

[SMC690]

I ain't touching chinese pocketbikes with a ten foot pole with a health inspector on the end. I like quality, stuff the price. Sorry. :(
Polini GP3 with the upspec kit will crank out enough to flip you off the back.
I unfortunately found that out on a demo we had in a shop I worked in one day in the back lane.
Mini moto's are fun but riding them especially when you are tall you look like a dog rooting a cricket ball. :)
Juz.

[Tom]

Wow!!!!!

a Motard with 75 Bhp for less than $3,000 on Ebay!!!!!

http://cgi.ebay.com.au/YAMAHA-TTR-600-SUPER-MOTARD-and-DIRT-BIKE-ALL-IN-ONE_W0QQitemZ170028790464QQihZ007QQcategoryZ102689 QQrdZ1QQcmdZViewItem

Me thinks it might be a slight exageration.

Tom.

[jakestein]

Thats the best, miss quoted figure!
well since ....... Yamaha's 17500rpm thingo.

[Muzzard]

And fitted with 160 rear on pinwheels that normally only take a 140 at the optimum for tyre to rim size...
Mmmm :-k

[Wobbly]

Hey I can sell you a 85hp DRZ then ... and its all in pieces which means less reciprocating weight to it must be up to about 95hp by now then :lol2:

Anyone got a drz crank puller? :-k :lol2:

[SMC690]

Lucky if the fucker (TTR600) put out 35hp and they weigh a fair bit too.
I hadded won wonce and crashed the shit out of it 3 times in the mud at Sth Morang on GPR70's at the first ever motard event there.
I gave up n went home, too much bark off me.

[sako]

just spotted these:


http://cgi.ebay.com.au/KTM-SUPER-MOTARD-WHEELS-BRAKES_W0QQitemZ200029711538QQihZ010QQcategoryZ102 677QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

anyone know what this setup would be worth new?

[Wobbly]

Wheelset prices range anywhere up to about 2500 for a brand new KTM hard parts setup, but the beringer braking setup is pretty swish and probably worth about a grand in itself. Price up a new wheelset from your local ktm dealer and you'll know how much it'd cost you in a worst case scenario...and keep an eye on ebay, as the ktm wheelsets seem to crop up fairly often...

[Wobbly]

Wake up you ktm reprobates :lol2:

Sure it might not make you any faster, but whoar :)

http://cgi.ebay.com.au/KTM-450-525-Slipper-Clutch-STM_W0QQitemZ200028219265QQihZ010QQcategoryZ29705Q QrdZ1QQcmdZViewItem

[Muzzard]

:roll: No wonder its for sale.
Damaged internally with broken casting, I think it is the actual basket too.

[sako]

http://cgi.ebay.com.au/husqvarna_W0QQitemZ260034672866QQihZ016QQcategoryZ 32625QQrdZ1QQcmdZViewItem

what do you guys reckon? decent price?
it's done a few k's

maybe the owner is a member of this forum?

[Flash]

I have 27000km's on mine, but I have had a few problems. Gearbox broke at 17200km's but it was an unusual problem that I haven't seen or heard of since. The biggest problem is the clutch master cylinders!!

[Muzzard]

Looks good for the Buy Now price of $5600
Has the right gear fitted atready to make a good road motard, and the 15000km is only half way to a rebuild.
How long would you want to keep it would be the question and I tend to keep bikes several years to get the best advantage out of them.
So as an '04 model and still very current in performance I think it would have been worthy of more investigation ;)

[Wobbly]

Wow, that's a prety dang good price. Sure its got a few k's on it, but pop the head off and whack in a new set of rings if you're worried and you'd be set to go. Plus of course you'd probably want to replace the valves with over sized ones while you're at it, drop in some hotter cams, take a bit off the head, etc etc ;)

Ash - remember what we were talking about with spare motors and all?!?!? That's about your changeover price to a new bike.... :snigger:

[Flash]

:-k



Don't get me wrong I love my 450 infact if it had a much bigger exhaust outlet it would have the same problem as Sprint does (white slimy crap) :D
But due to the fact I do 98% commuting and 2% fun i have to consider what next :-k

[sprint666]

On ebay, Honda people out there..............

http://cgi.ebay.com.au/motard-wheels-honda-450_W0QQitemZ130032053115QQihZ003QQcategoryZ35230Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Flash]

That seems OK

[Bomber640]

Nice looking, cheap old 620SC if anyone is looking for something to frighten school girls at the bus stop with...

http://cgi.ebay.com.au/KTM-620-1998-MOTOR-BIKE-SHOW-CONDITION-ROAD-REG_W0QQitemZ190035201179QQihZ009QQcategoryZ102677 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Wobbly]

Looks cool!

[Wobbly]

Cast alloy wheels to suit KTM's with 20mm axles (LC4's, some EXC's) ... in vic and cheap cheap...

http://cgi.ebay.com.au/KTM-SUPERMOTARD-KIT_W0QQitemZ120037765971QQihZ002QQcategoryZ29705Q QrdZ1QQcmdZViewItem

[sako]

are the 20mm axles pre '03 model exc's?

[Wobbly]

I believe so, but don't quote me on it ... dim memory says they went from 20 to 26 around that time? Juz can probably fill in the gaps here...

[Wobbly]

http://cgi.ebay.com.au/Akrapovic-KTM-Slip-on-Muffler_W0QQitemZ250036122281QQihZ015QQcategoryZ32 628QQrdZ1QQcmdZViewItem

For those without a twin system on their LC4 :)

[speaksgeek]

For those without a twin system on their LC4

That's me. Me bid. You NOT. :D

[SMC690]

I'll send messages to all your ebay competition telling them the muffler has been posted by a Nigerian scammer and doesn't really exist. ;)
That would suit your bike a treat dude.
I have all the jetting specs. :D

[Muzzard]

You are not getting this because of what I said the other day are you Angus.
I know you scratched the StainTune you have on the bike and I feel bad about that and the plastics, and dont want to think I put you off about your pipe.
That Akrapovic will be nice on your bike, loud like it should be, and definitely an improvement in not only the bling stakes but would suggest weight and performance too. ;)
Go for it mate...

[SMC690]

Check to see if it comes with the 'noise reduction' insert.
A new one does, this one should. :)

[speaksgeek]

Nah Muzz, not to impress you.
I like my staintune, even scratched. But 2 spares is better than 1 (still have the boat anchor too). Especially for $200-300. Titanium is also cool and light.
To be honest, I like the look of the staintune more than the akra but weight could sway me - interested to see if performance would change perceptibly.

[Wobbly]

http://cgi.ebay.com.au/Motard-Wheels_W0QQitemZ170038120696QQihZ007QQcategoryZ297 05QQrdZ1QQcmdZViewItem

[speaksgeek]

Beaut Akra just went for $535, which is pretty good - but more than I am going to spend right now :(

[Wobbly]

YZ/WR cast wheels...

http://cgi.ebay.com.au/Motard-Wheels-to-suit-Yamaha-WR_W0QQitemZ270039914781QQihZ017QQcategoryZ32628QQ rdZ1QQcmdZViewItem

[Wobbly]

4.25" bare rim...

http://cgi.ebay.com.au/supermotard-excel-rim-BRAND-NEW-still-in-wrapping_W0QQitemZ190039931804QQihZ009QQcategoryZ2 9705QQrdZ1QQcmdZViewItem

[Wobbly]

Duke2!

http://cgi.ebay.com.au/ktm-duke-2_W0QQitemZ280038627589QQihZ018QQcategoryZ32625QQr dZ1QQcmdZViewItem

[Tom]

Dead sexy Husky

http://cgi.ebay.com.au/husqvarna-TC-510-supermoto-06_W0QQitemZ220038187149QQihZ012QQcategoryZ32074QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Tom]

XR650R Tard setup.

http://cgi.ebay.com.au/Honda-XR650R-Super-Motard-Set-Up-Rims-Discs-F-Caliper_W0QQitemZ270039519333QQihZ017QQcategoryZ35 230QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Wobbly]

This would have to be up muzz's alley...

http://cgi.ebay.com.au/500cc-Rotax-Supermotard-1983_W0QQitemZ260041369258QQihZ016QQcategoryZ10267 7QQrdZ1QQcmdZViewItem

[tambi]

4.25 Excel Rim
http://cgi.ebay.com.au/supermotard-excel-rim-BRAND-NEW-still-in-wrapping_W0QQitemZ190043169356QQihZ009QQcategoryZ2 9705QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Can somebody please buy that Husky :roost:

[Flash]

I doubt the Km's on it if it is the one I know of!!

[sako]

how much work has it really done flash?

[Flash]

If it is the one I was thinking of mate, I'd say it would be well over that. He had replace the starter clutch and used to have a wet on the front. Also was in the process of having some major engine mods done. Not sure weather this was because it was apart. The way he talked about the bike he was always on it and rode real hard!
They handle it OK as long as they are maintained

[sako]

might be worth a miss then,

no one wants those 2 dukes either

[Muzzard]

This would have to be up muzz's alley...
http://cgi.ebay.com.au/500cc-Rotax-Supermotard-1983_W0QQitemZ260041369258QQihZ016QQcategoryZ10267 7QQrdZ1QQcmdZViewItem

Looks like it might even be in a late model WRF/YZF frame too ;)
Speaking of Rotax's,
I haven't heard from John (Trubritbiker) for a while :(

[Wobbly]

Allright your WA lunatics, this one has your name on it - motard wheels, spare hubs, 6 piston caliper - just eject brain :)
http://cgi.ebay.com.au/1999-Honda-CR500R-CR-500_W0QQitemZ330041520951QQihZ014QQcategoryZ102675 QQrdZ1QQcmdZViewItem

Something to show sibbo who's boss with -
http://cgi.ebay.com.au/Husaberg-FS650-Motard-x-Roadbike_W0QQitemZ190043484619QQihZ009QQcategoryZ3 2074QQrdZ1QQcmdZViewItem

Some crf madness for those north of the border -
http://cgi.ebay.com.au/HONDA-CRF450-MOTARD_W0QQitemZ160042704153QQihZ006QQcategoryZ102 675QQrdZ1QQcmdZViewItem

[Wobbly]

XR!

http://cgi.ebay.com.au/Honda-XR650R-XR650-Motard_W0QQitemZ250041576038QQihZ015QQcategoryZ320 74QQrdZ1QQcmdZViewItem

[Wobbly]

Allright all you poor CV carb equipped LC4 owners, here's your chance :D

http://cgi.ebay.com.au/KEIHIN-RACING-CARB-SLIDE-CARB-FCR-H-41mm-PUMPER-CARB_W0QQitemZ300041496048QQihZ020QQcategoryZ29705 QQrdZ1QQcmdZViewItem

[Wobbly]

SMR450!

http://cgi.ebay.com.au/Husqvarna-SMR-450-100th-Anniversary-2004-Supermotard_W0QQitemZ290043710478QQihZ019QQcategor yZ32625QQrdZ1QQcmdZViewItem

[Flash]

That fucker has the same bike and helmet!!! Every body wants to be me!! :D

[Wobbly]

You're not just whoring yourself around are you? :-s :lol2:

[Flash]

Mmmmmmmmmmmmmm................no! :D

[Sibbo]

Every body wants to be me!! :D
What would they want to do that, other than to take the piss!!!
:lol:

[SMC690]

That fucker has the same bike and helmet!!! Every body wants to be me!! :D

Maybe that's why he's selling it all. ;)

[Sibbo]

That fucker has the same bike and helmet!!! Every body wants to be me!! :D

Maybe that's why he's selling it all. ;)
:poke: :rofl: :rofl:

[SMC690]

Couldn't help myself, he left himself wide open there. :)

[SM93]

i don't care what anyone says the 04's are best, I wish i could buy it. one for street on the track. 8)

must bring back some good memories Ash

[Flash]

Sure does! THis fucking 610 is a heavy mother.

[Wobbly]

Supercomp! With wheels, but require fitting...

http://cgi.ebay.com.au/KTM-620-SUPER-COMP_W0QQitemZ290044398822QQihZ019QQcategoryZ10267 7QQrdZ1QQcmdZViewItem

[megahead]

what a cool bike
looks almost as good as mine ha

[Wobbly]

Certainly old school, but looks cool :)

[Wobbly]

Allright all you poor CV carb equipped LC4 owners, here's your chance :D

http://cgi.ebay.com.au/KEIHIN-RACING-CARB-SLIDE-CARB-FCR-H-41mm-PUMPER-CARB_W0QQitemZ300041496048QQihZ020QQcategoryZ29705 QQrdZ1QQcmdZViewItem

Well I hope it was someone on here that won that FCR41 - that thing went for a SONG ($200). Cheapest i've seen them sell for on US/Euro auctions has been about $500 and they don't come up in Aus very often. You'll pay about a grand retail for one of those jiggers....... :shock:

[kroosn]

man i never saw it. i definately would have paid $200 for it. oh well guess ill have to go out and get a job to buy one. lol.


Kroosn

[speaksgeek]

Spewing I missed the end of it. Was so hungover this morning slept right through. I would have paid that too.

[Tom]

There's another one on there right now going for $250

[Tom]

Woops, bid just shot up to $383.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ih=001&item=110049290561&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1

[Wobbly]

Over $400 now with 2 days yet to run...

[Daws]

Faaark! I have been trying to keep that one quiet! I'm Paildolphin on Ebay :lol:

There goes any chance of getting a cheap FCR41! :cry:

C'est la vie, I wondered how long it would be before someone spotted it!

[SMC690]

Fuck, that first one was cheap.
I would have paid 2 hunge for it just for spare parts for mine. ;)

[Wobbly]

Sheesh, I did give youse blokes a weeks notice :lol2:

[SMC690]

Can't bid, need to pay my account. Doh.

[Wobbly]

Ok all you aspiring DRZ owners contemplating crossing the simpson desert...

http://cgi.ebay.com.au/DRZ-28-litre-tank-Safari-as-new-Get-500-plus-ks-fuel_W0QQitemZ170045115577QQihZ007QQcategoryZ32628 QQrdZ1QQcmdZViewItem

[Wobbly]

WR/YZ front wheel and rear rim...

http://cgi.ebay.com.au/Excel-Supermotard-Rims-suit-Yamaha-wr250f-yz250f-yzf250_W0QQitemZ110050928316QQihZ001QQcategoryZ352 33QQrdZ1QQcmdZViewItem

[Wobbly]

RGV cast wheels for KTM...

http://cgi.ebay.com.au/motard-wheels-ktm-2000-model_W0QQitemZ230045744816QQihZ013QQcategoryZ2970 5QQrdZ1QQcmdZViewItem

[Wobbly]

Front cast motard wheel for XR400 (probly fit other XRs too...)

http://cgi.ebay.com.au/17-Motard-wheel-kit-XR400_W0QQitemZ220043912316QQihZ012QQcategoryZ3262 8QQrdZ1QQcmdZViewItem

[Wobbly]

Looks like a knock-off of a braking 4 piston caliper design, though apparently 28mm pistons all round...

http://cgi.ebay.com.au/SUPERMOTARD-4-PISTON-BRAKE-CALIPER-2-SUIT-ALL-JAP-MODEL_W0QQitemZ290045287541QQihZ019QQcategoryZ3523 0QQrdZ1QQcmdZViewItem

[Wobbly]

540 big bore kit for KTM 525...

http://cgi.ebay.com.au/KTM-540-Kit-suits-SXS-EXC-525_W0QQitemZ220043579875QQihZ012QQcategoryZ29705Q QrdZ1QQcmdZViewItem

[kroosn]

This could be an interesting project for someone

Husaberg FS650

http://cgi.ebay.com.au/HUSABERG-FE650-03-MODEL-NOT-KTM-CRF-YZF-KXF-RMZ_W0QQitemZ140048799138QQihZ004QQcategoryZ29705Q QrdZ1QQcmdZViewItem

[Muzzard]

I have a good mate with a Supermono in his shed that I have been at him to get converted to something usable (or just get going so I can ride it next time he goes to the Island ;) )
Mmm,
Now theres a cheap frame to start an aircooled motard, the 4th baby maybe?

[Wobbly]

What a loser! Who is that bozo? :lol2:

[Flash]

Funny Muzz I know a guy like that as well! Wonder if it's the same guy? :-k Mmmmmm. If it's the same guy maybe we should go there and take it and finish it our selves ;)

[Muzzard]

Not so silly when you think I'm about to start another smoker hybrid with the ZX6R front and rear ends.
Heres a donor frame with compliance!
Fit the KX motor, swing a GMC handmade pipe underneath
:twisted:

[Wobbly]

No compliance sorry muzz, honda rs250 GP bike frame ;)

[Muzzard]

I meant the Berg frame and a blend of bits from the cheap KX I am about to do a deal on.

The supermono would blend nicely with the Berg frame too mate...

[Tom]

Do you reckon you could squeeze a ZX6R motor in that frame? :D

[Wobbly]

With a TIG and an angle grinder anything is possible :lol:

[tambi]

KTM 620

http://cgi.ebay.com.au/KTM-620-SUPERMOTARD-TRAIL_W0QQitemZ280045574713QQihZ018QQcategoryZ3262 5QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Sibbo]

Muzz, I think I am liking your project. Can I have a ride when it is at its meanest???

[tambi]

TM SMX450, exotica mmmmmmm...............
http://cgi.ebay.com/ebaymotors/Other-Makes-TM-SMX450-TM-SMX450-Factory-spec-supermotard-Ohlins-Brembo_W0QQcmdZViewItemQQcategoryZ6719QQihZ013QQit emZ230047609007QQrdZ1QQsspagenameZWDVW

[Wobbly]

Booiiiiinnnngggg!!!

[skivi]

http://cgi.ebay.com.au/WR250F-2001-Yamaha-Renthal-bars-Staintune-exhaust-reg_W0QQitemZ250044991604QQihZ015QQcategoryZ102679 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

i smell a bargain.

learner material for me you think boys?
advice anyone?

[Wobbly]

Mmm, looks very well used ... could be ok, but i'd be having a look for receipts for the engine work he claims and giving the bike a very thorough check over. I'd also ask the owner what sort of maintenance regime he gave the bike, and check the condition of most of the bearings on it, as it doesn't exactly look like its had a whole lot of tlc...

[Tom]

Me likey big engine. . .

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230048508007&fromMakeTrack=true

[devo]

Crikey.

Though I'm confused as to how this ended up for sale.

[Tom]

My guess is it was a backup/spare engine for a factory team. When they upgrade to a new model bike the engine is useless to them.

[devo]

Makes sense. Theres a full TM SM in there for sale somewhere. Convenient.

[shane]

now that is sweet , and cheap also not sure i could resist if i was in aus . not sure what i would do with it but it would be nice to have

[JB]

Not bad for a k...

http://cgi.ebay.com.au/NEW-supermoto-supermotard-excel-rims-tyres-dics-calipa_W0QQitemZ200044323535QQihZ010QQcategoryZ678 2QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Muzzard]

Ex Yamaha XTX660 Motard.
Hubs are useless to anything else...

[tambi]

You could buy that Husaberg frame also on ebay and slot the TM donk in it :twisted:

[Wobbly]

Wheels originally off a husky te570 but could fit others - claims it has a 5.0" rear rim...

http://cgi.ebay.com.au/Motard-Wheels-Excel-Talon-Husky-KTM-Honda-Yamaha_W0QQitemZ200046128817QQihZ010QQcategoryZ297 05QQrdZ1QQcmdZViewItem

[Wobbly]

YZ/WR wheels!

http://cgi.ebay.com.au/MOTARD-WHEELS_W0QQitemZ110054451893QQihZ001QQcategoryZ326 28QQrdZ1QQcmdZViewItem

[Muzzard]

Wheels originally off a husky te570 but could fit others - claims it has a 5.0" rear rim...
http://cgi.ebay.com.au/Motard-Wheels-Excel-Talon-Husky-KTM-Honda-Yamaha_W0QQitemZ200046128817QQihZ010QQcategoryZ297 05QQrdZ1QQcmdZViewItem
Have a look at the chain pin marks in the rear rim.
He says in the ad this is common on motards :roll:
Another of the misinformed, and by someone too lazy, or ignorant to help him offset the friggin' rim...

[Wobbly]

Anyone with a DRZ-SM or a DRZ-S (not DRZ-E)...

http://cgi.ebay.com.au/Keihin-FCR-39-MX-Carb-fits-DRZ-KTM-Husaberg-YZF-CRF_W0QQitemZ110055166753QQihZ001QQcategoryZ29705Q QrdZ1QQcmdZViewItem

This is a most excellent upgrade to your standard CV carb that comes fitted on the SM model (ie markeemark) or anyone unfortunate enough to buy an offroad S instead of the regular E model. Doesn't do anything for ultimate hp but does heaps for throttle response.....

[devo]

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260052966887&ssPageName=ADME:B:SS:AU:1

KTM wheels.

[Wobbly]

Wheels for aircooled XRs...

http://cgi.ebay.com.au/Motard-Rims-suit-Honda-XR-650-L-with-Michelin-Pilots_W0QQitemZ290052169663QQihZ019QQcategoryZ297 05QQrdZ1QQcmdZViewItem

[Wobbly]

More KTM wheels ... not sure for which model though...

http://cgi.ebay.com.au/KTM-SUPER-MOTARD-RIMS-AND-TYRES-NEAR-NEW_W0QQitemZ230054028019QQihZ013QQcategoryZ29705Q QrdZ1QQcmdZViewItem

[Sibbo]

I know I should be listing things for sale, but i want to bitch.

Why do people leave no room for bidding and getting something cheap? What is it with starting bid at $1,500 and buy it now at $1,500!!! That is not an auction, that is a for sale.

Dont people understand that things are only worth what someone else is willing to pay for it at that point in time. It does not matter what you paid for it, hey I might of paid $14 grand for the berg (which I did not), but it is only worth about $7 grand, cos thats what people are willing to pay. I could have it advertised for $11 and get no bits. DUR!!! It aint worth that much!

Motard rims might cost heaps to buy, but there aint the market for second had suff. So limited demand forces the price curve down and things become cheap. Wake up people!!!

Rant over.

[Tom]

So are you selling the Berg for $7k are ya?

[devo]

They're only hurting themselves Sibbo. A low starting auction price gets more people bidding to start with and more people stick around who may make emotionally driven bids just to win. At this point in time there IS the demand for 2nd hand motard wheels, and $1500 is less than what people have been willing to pay. So yeah, as I was saying, they are only hurting themselves.

I think he just wants a quick sale, and he will get it.

[Sibbo]

So are you selling the Berg for $7k are ya?
I would consider floging it for $9k, but we will see how we go, it better be trouble free from now on.

But if I do decide to f#*k it off, I dont expect a lot in return, cos who wants to buy a bike with problems?

[Wobbly]

So when the big end goes let me know and I'll give you 5k for it ;)

[Wobbly]

XR650R wheelset...

http://cgi.ebay.com.au/Super-Motard-Rims_W0QQitemZ250053007331QQihZ015QQcategoryZ29705 QQrdZ1QQcmdZViewItem

[Wobbly]

Muzz, here's one for you mate ;)

http://cgi.ebay.com.au/Montesa-360-ready-to-race-VMX_W0QQitemZ170054106655QQihZ007QQcategoryZ102690 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Muzzard]

Be a nice start for another VMX bike.
Needs some serious blingin' before I'd be fronting it to a meeting.
Like a complete restoration :lol:

[tambi]

Husaberg FS650e

http://cgi.ebay.com.au/2005-Husaberg-FS650e-Super-Motard_W0QQitemZ130052326870QQihZ003QQcategoryZ326 25QQrdZ1QQcmdZViewItem

[tambi]

Husqvarna TE610

http://cgi.ebay.com.au/Husqvarna-TE610-Motard_W0QQitemZ150063951653QQihZ005QQcategoryZ320 74QQrdZ1QQcmdZViewItem

[tambi]

KTM LC4 Muffler

http://cgi.ebay.com.au/KTM-LC4-Supermoto-muffler-genuine-98dB-version-625-640_W0QQitemZ110060708211QQihZ001QQcategoryZ29705Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem

[tambi]

2005 YZ450F Motard
http://cgi.ebay.com.au/YAMAHA-YZ450F-2005-MOTARD-EXCELLENT-CONDITION_W0QQitemZ300055635961QQihZ020QQcategoryZ 102679QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[tambi]

2005 WR450F Motard
http://cgi.ebay.com.au/Yamaha-2005-WR-450-supermoto-enduro_W0QQitemZ160057721982QQihZ006QQcategoryZ102 679QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Wobbly]

Looking for that commuter? KLX250 tard.

http://cgi.ebay.com.au/Kawasaki-KLX250-super-motard-KLX-250-MELBOURNE_W0QQitemZ320059659609QQihZ011QQcategoryZ 102676QQrdZ1QQcmdZViewItem

[Muzzard]

Couple of cheap brand new DRZ400SM's in Geelong...
http://cgi.ebay.com.au/2006-SUZUKI-DRZ-400SM-SUPERMOTARD-BRAND-NEW_W0QQitemZ110064695311QQihZ001QQcategoryZ102687 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Muzzard]

And a few assorted bits and pieces...
http://cgi.ebay.com.au/KTM-640-SUPER-MOTARD-SPECIAL_W0QQitemZ120063219103QQihZ002QQcategoryZ10 2677QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com.au/HUSABERG-OR-KTM-FRONT-DISC-AND-CALIPOR-MOUNT-MOTARD_W0QQitemZ230062545836QQihZ013QQcategoryZ297 05QQrdZ1QQcmdZViewItem
http://cgi.ebay.com.au/Motard-Wheels-YamahWR-450-2006_W0QQitemZ160061409975QQihZ006QQcategoryZ29705 QQrdZ1QQcmdZViewItem
http://cgi.ebay.com.au/KTM-Supermoto-wheels_W0QQitemZ260061869506QQihZ016QQcategoryZ297 05QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Flash]

Those WR wheels seem very pricey, Steve bought new Morad-talon wheels for $1600 Disc kit what - $350 and a sprocket $90 a front guard $50 oh yeah a rear disk maybe $200. Doesn't add up to 3k!
Like Sibbo said some people don't realise the price of second hand shit do they!!

[Muzzard]

Posted up the Mootard there too but fuck knows where.
I cant find the bastard again now :evil:

[Muzzard]

Might be here though :oops:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250060953865

[skivi]

Looking for that commuter? KLX250 tard.

http://cgi.ebay.com.au/Kawasaki-KLX250-super-motard-KLX-250-MELBOURNE_W0QQitemZ320059659609QQihZ011QQcategoryZ 102676QQrdZ1QQcmdZViewItem

dang i would have given my left and right nut for that bad boy!

oh well the hunt is still on, plent of fish in the sea ey

[Sibbo]

That KLX250 is a 1994 that went for $3,400!!!! OMG!!!! Thats god dam heaps.

I might have to sell off the KL, 14 years older and nothing going for it, might get $800......not much chance getting more than $80 though!!!

I might have to have a few tail scraping stunt picks taken of it as a fully sic stunt bike....now where did I leave my baseball cap and singlet?

[Wobbly]

Shroud stickers for KTM 450/560SMR...

http://cgi.ebay.com.au/ktm-radiator-shroud-decals-06-smr-450-560_W0QQitemZ250061950700QQihZ015QQcategoryZ102695 QQrdZ1QQcmdZViewItem

[Wobbly]

And one for muzz :lol2:

http://cgi.ebay.com.au/Dirt-Track-Sidecar-R1_W0QQitemZ230067070381QQihZ013QQcategoryZ32626QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Wobbly]

CRF motard wheelset...

http://cgi.ebay.com.au/Motard-Wheels_W0QQitemZ330064764725QQihZ014QQcategoryZ297 05QQrdZ1QQcmdZViewItem

[Muzzard]

The DRZ's in Geelong went for $6900 for a brand new K6 model!
Good buys there,
One unhappy dealer as thats not even cost!...

[skivi]

little bit off-topic

http://i23.ebayimg.com/07/i/000/7f/c3/9f3d_1.JPG

lethers custom made, one piece or two for $500 (e BAY) (http://cgi.ebay.com.au/Custom-made-motobike-suit-your-colours-measurements_W0QQitemZ130060735116QQihZ003QQcatego ryZ125985QQrdZ1QQcmdZViewItem)


what do you think? sounds pretty good.


-nick

[Sibbo]

If you have knock knees!

[skivi]

yum

KTM Duke II LC4 640 Supermotard

http://cgi.ebay.com.au/KTM-Duke-II-LC4-640-Supermotard-Motard-Supermoto-Moto_W0QQitemZ130061529941QQihZ003QQcategoryZ32625 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://i2.ebayimg.com/06/i/000/80/1e/a8fa_1.JPG

[speaksgeek]

http://cgi.ebay.com.au/KEIHIN-FCR-39-MM-CARB-CARBURETOR-YZ-WR-DRZ400-ATV_W0QQitemZ110071086479QQihZ001QQcategoryZ35601Q QrdZ1QQcmdZViewItem

Carby for you DRZ owners out there...

[speaksgeek]

And one that might fit my 640 LC4...
Anyone got insight whether this is going to suit my LC4?

http://cgi.ebay.com.au/Honda-CRF-450-CRF450-Keihin-FCR-Carburetor-41mm_W0QQitemZ120068001974QQihZ002QQcategoryZ35597 QQrdZ1QQcmdZViewItem

[Wobbly]

You should be able to make it fit on the lc4 as its just your standard FCR41 ... you might have to make some adjustments on the mounting side but they shouldn't be major...

[dicky]

There are FCR41's and there are FCR41's.
All parts are changeable, the hard part is finding which part number you need and then finding someone to buy it from.
Both airbox and manifold side mountings are changeable, but trying to find the correct part can be a nightmare. Actually finding someone that can sell you the correct part is usually worse.
Other than that, later model FCR's have a choke or hot start lever, earlier model ones don't. There is no way to know as there are no part numbers.
You will probably have to reroute vent and overflow lines as there won't be anywhere to connect them to the FCR.

Worth their weight in gold, but you pay that much in frustration unless you buy the compete carb as a kit for your specific bike.

dicky.

[speaksgeek]

Now that's the kind of pessimistic attitude I like!
I'm not that big on having a hard time fitting things together, so might have to wait until one turns up straight off an LC4.

[Wobbly]

XR250 tard. Seems a bit expensive for a fairly old XR250 with wheels, but once the auction ends with no bids you can probably drive a bargain. Would be good for wifey ash ;)

http://cgi.ebay.com.au/Honda-XR-250-Supermotard-Motard_W0QQitemZ330066181824QQihZ014QQcategoryZ102 675QQrdZ1QQcmdZViewItem

[Muzzard]

Yamaha 250
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250066934696

[speaksgeek]

Good find Muzz, you should buy it!

Seriously though, one tip is to put somewhere in the listing along the lines of...
"this is better than a KTM, Husaberg, Honda, Husqvarna" with as many names of super motos you can think of. That way if people search for those things, they'll get your ad, and you might give them an alternative to think about.

[Tom]

Absolute weapon:

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&rd=1&item=120068777738&ssPageName=STRK:MEWA:IT&ih=002

[Wobbly]

There is a limit to how much performance a man can handle [-X

[Flash]

Not a motor bike I know but.........


http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=220066712535&ssPageName=ADME:L:LCA:AU:31

[Wobbly]

Is that to go along side your life sized naked sibbo cutout :shock: :shock:

[Muzzard]

And to go with the VideoEzy reject collection.
Mel Gibson as Mad Max,
Clint Eastwood as Dirty Harry,
Charles Bronson as The Vigilante,
Hugo Weaving as Priscilla Queen of the Desert
:rofl:

[tambi]

Excel motard wheel 17x5
http://cgi.ebay.com.au/EXCEL-REAR-MOTARD-RIM-17-X-5-INCH_W0QQitemZ190069765613QQihZ009QQcategoryZ29705 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[tambi]

Husqvarna Motard Kit
http://cgi.ebay.com.au/HUSQVARNA-MOTARD-KIT-BRAND-NEW_W0QQitemZ190068378059QQihZ009QQcategoryZ29705Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem

[tambi]

Motard wheels for a 300exc
http://cgi.ebay.com.au/Motard-Wheels_W0QQitemZ200065098720QQihZ010QQcategoryZ297 05QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[tambi]

Aprilia SXV550
http://cgi.ebay.com.au/APRILIA-SXV-550-SUPERMOTARD_W0QQitemZ330072330937QQihZ014QQcategor yZ102681QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[devo]

Aprilia SXV550
http://cgi.ebay.com.au/APRILIA-SXV-550-SUPERMOTARD_W0QQitemZ330072330937QQihZ014QQcategor yZ102681QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

It had it's first awesome service at 6 months and 4500km's.

Awesome.

[tambi]

It also goes Awesome/kph. Fully awesome.

[Tom]

Thats awesome. . . no really. . . awesome.

[Sibbo]

Pretty good price for this kit. Berg/ktm rims etc.
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=170061801227&ssPageName=MERC_VI_RSCC_Pr4_PcY_BIN_Stores_IT&refitem=170066585438&itemcount=4&refwidgetloc=active_view_item&usedrule1=StoreCatToStoreCat&refwidgettype=cross_promot_widget#ebayphotohosting

[Sibbo]

Catch tank for bergs/ktm. They are top shit, I have one on my bike.
http://cgi.ebay.de/Uberlaufbehaelter-fuer-KTM-EXC-Husaberg-Supermoto_W0QQitemZ230075236592QQihZ013QQcategoryZ 101889QQrdZ1QQcmdZViewItem

[Sibbo]

Cheap as chips (or the correct price, not over inflated stupid Aus prices).
http://cgi.ebay.de/Radsatz-supermoto-Rad-Raeder-KTM-und-Husaberg_W0QQitemZ170068324095QQihZ007QQcategoryZ2 1667QQrdZ1QQcmdZViewItem

[Tom]

For the smoker fans

http://cgi.ebay.com.au/HONDA-CRM-250-AR-1999-Enduro-road-trail-bike_W0QQitemZ200066164347QQihZ010QQcategoryZ10268 5QQrdZ1QQcmdZViewItem

[Sibbo]

its an "awesome condition" "active radical" CRM!!!!!

[JB]

Catch tank for bergs/ktm. They are top shit, I have one on my bike.
http://cgi.ebay.de/Uberlaufbehaelter-fuer-KTM-EXC-Husaberg-Supermoto_W0QQitemZ230075236592QQihZ013QQcategoryZ 101889QQrdZ1QQcmdZViewItem

Sprechen Sie Deutsch?

[tambi]

For the smoker fans

http://cgi.ebay.com.au/HONDA-CRM-250-AR-1999-Enduro-road-trail-bike_W0QQitemZ200066164347QQihZ010QQcategoryZ10268 5QQrdZ1QQcmdZViewItem

How come all 2strokes don't have the same fuel mix set up? sounds like it solves the practicality issues. How would you go about making something like this?

[Sibbo]

Sprechen Sie Deutsch?
Nein.

[Sibbo]

How come all 2strokes don't have the same fuel mix set up? sounds like it solves the practicality issues. How would you go about making something like this?
Its extra weight. If it brakes, so to does your bike. Where if you have the oil mixed into the fuel, it is fail proof...sort of.

[tambi]

I see, Honda must put a lot of faith in the quality/reliability of that set up then :?
Cheers

[Wobbly]

Same as for 2 stroke road bikes...

[tambi]

Alpinestars Motard suit
http://cgi.ebay.com.au/Alpinestar-motorcyle-racing-motard-leathers_W0QQitemZ130068351391QQihZ003QQcategoryZ1 25985QQrdZ1QQcmdZViewItem

[kroosn]

i had a similar oil injection set up i had on ts250 a while ago but the problem was the throttle cable split into two to go to the oil pump and where it split broke seperated and jammed locking the throttle full open resulting in me not being able to walk properly for 3 months, flipped her backwards and tore the ligaments in my knee. so now any bike i buy gets all that shit pulled off and a new throttle cable.

Kroosn

[devo]

People were asking about tyre warmers before...

here is a set.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260076659614&ssPageName=ADME:B:SS:AU:1

[Wobbly]

CRF wheelset...

http://cgi.ebay.com.au/Honda-Supermotard-wheels-suit-most-hondas_W0QQitemZ160074730416QQihZ006QQcategoryZ297 05QQrdZ1QQcmdZViewItem

[Wobbly]

DRZ-SM that's got a bit of damage...

http://cgi.ebay.com.au/SUZUKI-DRZ400SM-SUPER-MOTARD-8-05MOD-ONLY-2000KM_W0QQitemZ280070820325QQihZ018QQcategoryZ102 678QQrdZ1QQcmdZViewItem

[Wobbly]

Funky looking WR250 Yam...

http://cgi.ebay.com.au/YAMAHA-WR250Z-1998-REGISTERED-WR250-2-STROKE_W0QQitemZ250073379027QQihZ015QQcategoryZ102 679QQrdZ1QQcmdZViewItem

[tambi]

Ducati Supermono
http://cgi.ebay.com/ebaymotors/DUCATI-1993-SUPERMONO-10-of-65-269lb-superbike_W0QQcmdZViewItemQQcategoryZ49990QQihZ010 QQitemZ200069141590QQrdZ1

[tambi]

1976 Suzuki RG500
http://cgi.ebay.com/ebaymotors/SUZUKI-RG500-MK1-GRAND-PRIX-BIKE-RG-500_W0QQitemZ120076218445QQihZ002QQcategoryZ6027QQ rdZ1QQcmdZViewItem

[tambi]

Twin Akropovic for CRF250
http://cgi.ebay.com.au/AKRAPOVIC-FULL-TWIN-EXHAUST-SYSTEM-SUIT-06-07-CRF250_W0QQitemZ120074515490QQihZ002QQcategoryZ352 30QQssPageNameZWDVWQQrdZ1QQcmdZViewItem