Help required for checker plate flooring 6x4

[Joffa]

:yoohoo: G'day alltards.
Just wanting to track down some flooring for the old 6x4 ezytrailer fold-up.
Currently running some old chip board off the side of the road Tight Arse Trash collection, hasn't weathered too well.
Only place I could find some at a reasonable price is down Mordi in Melbourne $100 for 2.5mm steel. Is a steal at that price, however wont be in Melb till next year.

Any info greatly appreciated.
Geoff.
Sydney area

[Gonzo]

Go see Sam at Overkill Engineering in Hornsby www.overkill4x4.com
He should be able to help you.

[FrenRob]

Get a 6' x 4' sheet of 12 or 15mm non-slip formply.It is about $60 from any hardware store.It is "A Bond" glue,meaning waterproof and tuff as with no rattles...

[Wobbly]

I put a floor in mine and just used some formply from bunnings. Had to cut it to size so sealed it with a bitumin paint.

[jamesb_bau]

Alcan aluminium do checker plate...
I bought a sheet several years ago from them for a project....

Maybe order through work cuzz......

[Joffa]

Thank's for the replies.
Finally got day release so I got some 3mm Polished Alum C/plate through me old mate below. Very helpful, cut to size on the spot. (Hornsby).

http://www.gal-trailers.com.au/index.php?p=1_1

Alt was going to be Gonzo's mate at overkill 4X4.

Cheers ya'll.

[nitronaf]

sam at overkill is a champion

[Pedro]

search for offcuts galrore I think on ozauction or something like that, he usually has heaps going cheap and posts it