DRZ motard wheels for sale[SOLD]

[pete]

hey all

My motard rims to fit up to drz400 are up for sale. Selling due to lack of use....

3.5/17 front 4.25/17 rear.

Both gold talon hubs with gold excell rims. All wheel spacers included.

320mm EBC Oversize front disc and caliper offset bracket

NO rear disc.

Good condition but used chain and 39t rear sprocket. Brand new in packet 15t front sprocket.

All items are only 6 months old and have only been used for road riding.

Photo's of bike with wheels on it including some close ups can be found here....
http://community.webshots.com/album/281437966WnEFRT



Well over $2500 retail to buy this stuff new...

Asking $1600 and im not in any hurry to sell

Post a reply here if your interested or for faster reply call me on 0425342621

Im in north western sydney. Happy to courier interstate if your happy to cover cost.

[Muzzard]

I reckon they will be snapped up Pete... ;)

[Wobbly]

Lack of use...! :shock:

Nice pics :up:

[Muzzard]

Pete,
Do you happen to know if they will fit into a DRZ250 of current years?
Anyone know off the top of the head?

Can you measure the hub width just from the alloy outermost edge please Pete,
So I can assess for fitment to a CR125 with crush tube and wheel bearing/spacer replacement... :roll:
Neil, Maybe you could help there too mate. You know what I'm thinking seeing I have 'Little Red Riding Helmet' in my pocket :?: ...

[jakestein]

Oh NO :shock:
Ringa ding ding :twisted:

[pete]

Lack of use...! :shock:

Nice pics :up:

Ok maybe anticipated lack of use.......ive actually done 14000kms in the 6months ive had them.

Spending more time on the dirt now and no longer need a bike to commute on




Ill measure the hub today.....

[Flash]

A Honda....................... Geez man are you sick!

[Wobbly]

Yikes :shock:

What size are the CR axels? The talon hub kit for the drz runs an insert tube that runs the whole length of the hub with the bearings a commensurately larger diameter, rather than running the axel directly on the inner race and just having a tube internal to the hub to keep the bearings from any lateral movement.

The DRZ runs a 17mm axel (front and rear), so you could potentially have any axel size up to 20-24mm depending on what other bearings you can get a hold of running the same OD but diff IDs...

Cal, you'd better hurry up here mate! :lol:

[Muzzard]

C'Mon Cal
How much incentive do we have to give you then? :lol:

Yeah, I know of the crush tube fitting in the Talon hubs thats why I asked about the overall width. I figured a change of bearings and tube and bingo! ;)

[Flash]

I think Steve may want a set for race tyres, maybe

[Muzzard]

He better start fronting for some practice @ GPTC then eh Ash
You could come with him.. ;)

[pete]

Ill measure the hub today.....





154mm ;)

[Wobbly]

You could come with him.. ;)
:lol: :up:

[dicky]

Ash could keep count of how many times Sibbo and I can pass The Wobbling Black Beast in a fifteen minute session.
Stop him from getting bored as he wouldn't have much else to do if he went to a bike track :D

[Muzzard]

Thanks Pete,
154mm sounds good to me and I will make certain tonight and measure up the CR.. ;)

[Flash]

Ash could keep count of how many times Sibbo and I can pass The Wobbling Black Beast in a fifteen minute session.
Stop him from getting bored as he wouldn't have much else to do if he went to a bike track :D

:rofl: Ya crack me up ya really do!! :lol:

[Wobbly]

Bullcrap dicky, he hasn't got that many fingers ;)

[Flash]

Yeah, were all fucking comedians here! :yadda:

[Cal]

C'Mon Cal
How much incentive do we have to give you then?

Oh, I want them Muzz, no question about it, but cashflow is a little tight right now. If they are still up for sale a bit later on, then i'll be all over them like a rash. Anyone wanna buy an '02 954 FireBlade? Only ridden by a grandma to church on Sundays? ;)

[Wobbly]

Someone needs to buy Cal's blade - its in beautiful nick and has been lovingly fondled over the years :)

[Flash]

You let me down guys.... no comments like sounds like Ashes bike, or maybe Ash should let the granny out on his bike so it gets a run!
You guys really are full of suprises :lol:

[Muzzard]

OK Ash,
Cal,
When I have finished test riding your lovingly fondled Blade and convinced a mate to buy it, I'm heading over to Ash's place to take his bike for a spin, do stoppies, wheelstands, and all the other things Ash would do if he rode his bike with us once in a while. :lol:

(I say this very tongue in cheek as my own bike needs pedals at the moment :oops: ...)

[d_kimo]

hi pete,

if you still have them ill take them off your hands. i will call you tomorrow as it is probably too late to call tonight (was actually going to order new tomorrow). im in melbourne.

cheers,
david

[Muzzard]

Good on ya Kimo,
All being good the DRZ for Bright too then mate... :twisted:

[jakestein]

:twisted:
Whats the count for motards going on the GP ride? 5 or more now :?:

[Muzzard]

Yeah, 1/2 dozen or so mate as far as I can tell... ;)

[d_kimo]

yeah ... will be there for bright all being well and the gods smiling just right ... :D ... willl have the 98 gsxr back on the road for the first time in 2 years as well ... so i dont know which one i am more excited about :) ... hmmmm ... choices

[jakestein]

No choice about it,

Sell the GSXR and spend the money on the DRZ :happyspin:

[d_kimo]

cant sell the gixxer ... sentimental attachment ... :D ... and no matter how you look at it speed is still nice sometimes :)

[scozzie]

Forget speed.

You too could have a nice brown seat cover. :)

[Muzzard]

cant sell the gixxer ... sentimental attachment ...

Should read, 'Cant sell the gixxer, Busy fitting Renthals' :lol:

[d_kimo]

cant sell the gixxer ... sentimental attachment ...

Should read, 'Cant sell the gixxer, Busy fitting Renthals' :lol:

i looked at it with the farings off last week and taped a set of pro tapers to the top triple ... i did get a bit excited :)

[Wobbly]

Mmmmm :happyspin:

[Muzzard]

If you keep hanging round here David, You end up with a reputation for something ..
And Neil has the DRZ stakes tied up with, Most Black, Most tinkered, Most ridden in the rain, Most Grubby, Most slippery and hard to stay on, and Most Loud! =D>
Let it be the Gixxer with the Renthals :twisted: ..

[d_kimo]

hehehe ,,, but i would have to be able to ride it properly to do that ;) ... hmmmm ... tiny power monos dont count do they :(

[Wobbly]

Yes they do!!! :lol: :rofl:

[d_kimo]

:fucku: hehehe :D

[dicky]

I count them.
I also count rear brake lock-ups as 'slides'.

dicky.
<If only Sibbo had a camera when everything let go in front of him>

[Wobbly]

Of course they are. Are you guys slow or sumptin? :?

[d_kimo]

yay ... look what the courier brought me today :D :laughing:

http://img224.imageshack.us/img224/2741/mymotardwheels0016ci.th.jpg (http://img224.imageshack.us/my.php?image=mymotardwheels0016ci.jpg)

[Flash]

Yeah baby :blob: :supz:

[jakestein]

Thats GOLD =D>