YZ/WR Footpegs

[riquez83]

Hi i'm chasing a set of YZ/WR Footpegs, since the ones that come on my WR250X are a little skinny and are hollow. Making it impossible to mount peg sliders, not that i need them yet ;) but it would be nice to fit them up! geniune pegs are $200-$300 WTF :roll: anyway if someone out there has fitted a set of aftermarket pivot pegs or the like and has a set lying around let me know!

[jmcd]

I have seen some of the motorcrossers cut one peg and weld both sides to the existing peg to make them wider . If you found some old ones they could probably be revived and adapted. I wouldn't pay 2-300 bucks thats for sure!

[Ozmoto]

I have a set lying around , off an 05 WR...
PM me an offer.... need more food for the dog... :D

[riquez83]

PM sent

[Fazio]

tried ebay?

havent seen wr ones, but there were a set of new drz ones for only 39 bucks, so you should be able to find something.

faz

[Ozmoto]

here's the original set off mine , still in good nic , not bent but 1 is a bit scuffed on the outside , not sure how that would have happened , dont normally crash :lol: :lol:
Must have used the original spring when I put the Pivot Pegz on because I cannot find them anywhere....
The brackets are integrated into the frame on the 05's so just check that yours is the same... arent the new X models alloy frame ????
http://i288.photobucket.com/albums/ll165/Oz215/IMGP4440.jpg

http://i288.photobucket.com/albums/ll165/Oz215/IMGP4441.jpg

[riquez83]

yeah i think the angle is the same, i'll give it a whirl anyway, hopefully can use same springs! so i'll take em! thanks