Lakeside and Archefeild

[Benny#92]

Hey everyone when can we take the motards to either Lakesdie or Archefield again??keen as a bean to ride!!

[bandy]

Sept 18th at lakeside Benny
I might put the race suit on and try and whip that Husky's arse :D

[SM93]

any saturday at acherfield

[Wierus]

is the 18th @ Lakeside on the gokart track? If so, got any more details etc? Would love to try it out

[Benny#92]

Its on like donkey kong bandy. :-P. Wierus - Its 50 to ride and i think 20 for a day licence.. bandy?? and you get to ride from like 10 till 2 or something.. tight little track but good place for a ride. I might try get out to Archerfeild on saturday then for a gallop around.

[skinnywhiteguy]

Noise restrictions at lakeside?

[Glen]

90db noise restriction..

$35/half day, 9.00am-12.00pm or $50/full day, 9.00am-4.00pm..
Also
$20 day license or $55 yearly license (license valid for 12 months from date of purchase).

[skinnywhiteguy]

90db noise restriction..
.

Bummer

[BB63]

Just stuff your can with some stainless steel wool, it will kill the power a bit, but being quite tight wont matter that much.
Will try and make it myself.
Cheers brian

[dafunk]

this sounds good if i can get time off
17 archy
18 lakeside
im going for both
bike getting gearbox atm
mini still going !
[4th one]

[Jupey]

sweet i'm keen as for both! saturday archy and sunday lakeside sounds like a plan to me

[Jupey]

will have to put my stock can back on

[ozturtle]

I'm going for lakeside. Might drop down to archy to say hi will have the kids with me.

[Jupey]

not far off now gettin excited keen to run the kato on the new set up!!

[dafunk]

whoops its my sons 1st birthday on the 17th
but looking forward to 1st time at lakeside ;]

[Bayside Burg]

would not mind crakin Archy on Sat?

[Glen]

SWS Faysebook page..

https://www.facebook.com/home.php#!/groups/257029423989/

[BB63]

Hey Glen, how much will it cost for a mate to come along and do a session on my bike? ( assuming I can get the volume down enough ;) )
Cheers brian

[Benny#92]

Hey looks like i wont be commin now boys. Going to do the Team ride at Dirt Track on saturday :P

[bandy]

Benny ,,,, That would have to be the Nth Brissy cup which is on the 10th.
This saturday arvo/night.Theres a club day on the 18th.
I've only done one meeting at dirtrack this year.
I'm gona go for a blat at Lakeside on the 18th , sunday.
Well , i'm going to see how i go with my rooted wrist anyway.

[daffy67]

I am still keen to give Lakeside a crack now that i have bike that I can silence and still retain an acceptable level of performance.
Now for the excuses...picking up a set of Motard wheels next week (complete setup, with slicks) but this absolutely cleans me out $$ wise so in the short term I'm doing a few bush rides.:eek:

[danmoto]

Is lakeside bigger track than Archerfield? Also , how often will the Lakeside track be available?
I will be at Archie and have a photographer mate wo wants to come too and take some glamor shots!!!!

[BB63]

Yep Lakeside is bigger and as far as I know is available every second sunday.
So who else is a definate for Lakeside this sunday?
I know I am keen as. :D
Cheers brian

[Jupey]

i'm a definite for archy on saturday and lakeside on sunday cant wait, hoping my stock exhaust is quite enough

[dafunk]

im looking good for lakeside
bike in bits atm though

[ozturtle]

So how much longer is lakeside and what kind of top speed should I be chasing?

[bandy]

Think i get about 110-120 k's down the straight on my WR

Yeah i'll be there there and Roy too on his brand spankers tard
Should be a good day.
Benny gona rock up ? Benny ???

Hey, Going to park at the end of the straight near the riders briefing room too.
We will be there 8 ish.

Holy dooly , just looked at the bom site and they reckon 29 degrees for sunday

[daffy67]

U racing Mal or just spectating?

[bandy]

I'll be riding , Not racing .We don't race,just have a ride.
You better get that red thing tarded
I'm leaving saturday open for your Tarding pleasure if ya need a hand :D

[daffy67]

I'll be riding , Not racing .We don't race,just have a ride.
You better get that red thing tarded
I'm leaving saturday open for your Tarding pleasure if ya need a hand :D
Gave ya a buzz this arvy, I have to pay for my wheels tomorow but as it's southside I'll likely get a mate to hold 'em for me and I'll pick 'em up Satdy.
I remain flexible at this point, whatever happens I'll have 'em on this weekend. Bike is handling shite with these knobbies, think my headtstem bearings are gone (or maybe the steering damper) as with the bike on stand and front wheel off ground, when I move handlebars right, they bind a little and actually feel like they are stuck.
I have to force it to go around corners

[Glen]

So how much longer is lakeside and what kind of top speed should I be chasing?

Lakeside - 700m
Archerfield - 250m

I reckon 130km/h isn't unobtainable..

[Glen]

Hey Glen, how much will it cost for a mate to come along and do a session on my bike? ( assuming I can get the volume down enough ;) )
Cheers brian

How do you mean? A half day/fullday or just one 20min session??
Day license is still a must.

[ozturtle]

Wow better get a smaller sprocket sorted

[BB63]

How do you mean? A half day/fullday or just one 20min session??
Day license is still a must.
Thought I was pretty straight forward there Glen when I said just a session.:p
Dont matter anyway as he wont be back in time.
Cheers brian

[bandy]

You coming out for a ride Brian?
I noticed the boys at the bike shop(around the corner) have these baffels for sale $20 i think
I might get one to see how they go.
I reckon it might be good for the rmz for the day i tard it.

Looks like i'll only be doing a half day also

[daffy67]

Top day gents/ladies, thanks to Mal and Roy for getting me there. One day of many I'm sure, I especially liked the second track layout today. I just need to get a bit more skill and confidence and maybe not get lapped so much.

Although I did manage to pass that KTM rider who decided to have a sleep on the side of the track:prayer:

[Jupey]

yeah all i can say is OUCH!! biggest highside ever!

[skinnywhiteguy]

Binned it twice in 2 days bro! You ok?

[Jupey]

yeah i'm sore as man now just put the rear wheel in the dirt on the exit of a turn and it spat me off pretty hard, no broken bones thankfully

[BB63]

A couple of pics from today.
http://i20.photobucket.com/albums/b215/BB63/CopyofLakeside18-09-11069.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside18-09-11107.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside18-09-11103.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside18-09-11098.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside18-09-11080.jpg


Cheers Brian

[Londin]

I was there on my minitard but boy it was good fun. 2nd layout was awesome, nice and flowing

Can only recommend it :D

[dafunk]

was great !! agree with londin 2nd layout awsome ! heaps of track time on 2 bikes big and little tards . was nice to compare pit bikes to the crf150r that was there . heaps safer and faster than archy . noise was not that hard to make acceptable. my new favorite track ! ;]

[danmoto]

Cool then we have a new home track.. When is the next Lakeside?

[daffy67]

http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0018.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0018.jpg)
http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0017.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0017.jpg)
http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0016.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0016.jpg)

[bandy]

Huh , Look at that old shit box WR , still going.:)
Yeah , is was a really good day allright.
Was good to meet up with the boys from the sth/side and have a ride with em'
I know i really enjoyed riding with Dafunk , Ya hooligan.
Poor Old (young ) Jupey got spat off pretty knarly tho.
This is who and what rocked up.
Wr 450 (steely) my ol'e girl
DRZ (bb63)
WR400? (dafunk)That old girl goes good mate
Some bloody 450 kato that crashes (Jupey) :D
CRF450x 08 (daffy)
CRF450x 2010 new one ( Amate who's got to get on here)
And I was jealous of (Wierus's) 570 BERG
Who , WIERUS , Post up all that footage man

As the other fellas said , that other layout is really heaps better

[Glen]

Glad everyone had a top day!!!

If you haven't already joined it, get onto the SWS Faysebook page and all the latest will pop up in your news feed..
https://www.facebook.com/home.php#!/groups/257029423989/

Or, add this link to your favourites and check the calendar.. You'll find all info in the 'SWS Info' area..
http://swslakeside.46.forumer.com/

Also, Wierus.. GET that footage up!!!!!!!!

[BB63]

Did you take any pics Glen?
Cheers brian

[bandy]

Cool then we have a new home track.. When is the next Lakeside?

2nd oct
30th oct

[Glen]

Did you take any pics Glen?
Cheers brian
Short answer..
No..

Long answer..
Got to the track, Nick C was the first person to turn up and as I'm looking at his bike and see the Gopro mount, I think fuck it, forgot my camera and Gopro.. However, Nick C's mate who was the guy in the fluro vest wondering around said he'll get some up on the SWS page..

[Wierus]

I will upload some Gopro footage in the next couple of days. For some reason itunes deciced to corrupt the first five mins of the video but the stuff after that is ok. Might be a good thing, first few laps I was mega slow anyway :p

[ozturtle]

Dam it still pissed I missed it and I'm MC'ing a wedding on the 2nd.

[Jupey]

keen as to get out there for the 2nd if my bike is all sorted and good to go again!!

[Wierus]

Here's a link to some raw footage. I couldnt be arsed editing / cropping.. so its nearly the full 10min session :P
SWS@Lakeside 18/9/11 - YouTube

Apologies for the camera angle. Its pointing down a bit too much. You get to see my pretty new gloves though..

I wasnt able to upload in 720, as the video was totally fucked over by itunes crashing when trying to open it... I wasnt able to view it any other video viewer / editor after that... I was able to convert the video to iphone quality, which is what I uploaded. Hence.. 360p.

Turn 1 "incident" with Mal is around 2:20ish. :D I thought I had gone down 2 gears, but it only did one, and wasnt quite slowing me down enough.. Mal was kind enough to point me in the right direction however ;)

I wasnt able to keep up at all with Ron and Mal. Way too quick for me; got lots to learn yet :)

[skinnywhiteguy]

Thanks Josh! Looks like a great day out. I couldn't get lock wiring done before the day but hope to make the 2nd

[BB63]

Nice one :up:
Did you get any vids from the other layout earlier in the day?
Cheers brian

[dafunk]

im trying for the 2nd too
those goldspeeds on brandys bike were fast !
maybe we can swap next time hey bandy?
heres a link @ miniriders of someone crashing:oops:

http://i1125.photobucket.com/albums/l599/k96gix/SWS/DSC_0093-1.jpg

[Jupey]

i wish i had footage/photos of my highside in the first session still recovering now, have badly bruised ribs but not broken thankfully and i have a black left arse cheek.......

looking forward to the 2nd tho

[danmoto]

Yeah ill be keen as for Sunday the 2nd October if i can get gearbox issues sorted by then. Ill have a new piston also hopefully! Do you have to have lock wire engine and sump?

[Jupey]

i didnt lockwire anything just sliders barkbusters and a catch can

[skinnywhiteguy]

Fark I thought u needed lock wire

[daffy67]

And a decibel reading no louder than 90db

[Jupey]

Fark I thought u needed lock wire

i was never told anything about it and from what i could tell no one elses bikes were wired:up:

[skinnywhiteguy]

The sws forum rules say u need it. Ah well atleast I'll be good for next one

[ozturtle]

Yeh sorry dude I thought it was needed too

[daffy67]

Nothing on my CRF is lockwired and I did the session.
Glen might be able to clear up the confusion??

[bandy]

I never new you needed lockwireing either .
I normaly just ride my wr there and borrow a 12 mm socket
and take the side stand off .
The only thing lockwired on the WR is the catch can and sump plug.

I enjoyed the footage too , Werius .

I've been ginning around with the rmz and some baffles to shut it up so
i reckon i might have it tarded in the next 3 or 4 weeks.
Be fun to see if it is going to work as its been lowered for flatrack.

Looking forward to the 2nd oct for another ride at Lakeside.

And , No, Dafunk , your not having a go on my bike you hoon.
Buy yourself some yummy tyres:D

[Glen]

Righto..

Lockwiring is not essential. Those rules were published 2 years ago, I have gone into that thread and deleted it and altered some others.
The rules I altered mainly pertain to Minitard capacitys, it was changed from 160cc 4T to 180cc 4T. I also deleted all the race format crap.

The only things I'm really big on are sliders, catchcans and noise. Also my pet hate is seeing sliders completely worn away or nuts/bolts poking out of the slider, if your sliders look like that then get some new ones.

Sorry for any misunderstanding on this matter, carry on..

[dafunk]

looking forward to the 2nd
doing a few mods and will be there on the cr80 for the 1st time !

[ozturtle]

Defunk mate had my cr 80 out today can't wait to see yours up and going there so much fun to ride but I might need to have a chat to ya having a few fueling problems

[Jupey]

sweet i'm on for the 2nd now

[danmoto]

If i can get the husky back in time ill be there

[skinnywhiteguy]

glen if you see this, can you please let me know if the factory weights in the bar ends of a DRZ are enough of a "plug"? They are rounded alloy weights.

[Daws]

The need for plugged bar-ends at SWS is twofold, firstly it's so you don't wad-punch part of your body if you land on the open end, secondly it's so you don't damage the track surface. As the standard bar end weights are steel, going by the SWS rules you will need to replace them with plastic ones to lessen the chance of damaging the track surface.

Glen might be able to clarify this further. Normally, Paul from Big-knobs is there and he usually has bar-end sliders, or check www.bigknobs.com.au and order them.

[skinnywhiteguy]

Thanks daws. Was just wanting to clarify as the sws site says ends must be plugged or guards with sufficient plastic. Ill get on to bigknobs :up:

Anyone know if the factory pookart sm fatbars are 14 or 17mm?

[Glen]

Paul is on the money.. Nylon/Delrin type bar ends only..

Also, mention my name and Lakeside and you will receive 'mates rates'..

https://www.facebook.com/pages/PH-race-gear-makers-of-Big-Knobs-Sliders/114140491994436?sk=info#!/pages/Big-Knobs-Crash-Sliders/151173808238167

[skinnywhiteguy]

Thanks for clearing that up glen. Got in touch with Paul and he has referred me to a supplier in brissy so hopefully can get them before the weekend

[Glen]

That would be Jason, I'd say, at Kedron..

[skinnywhiteguy]

Yup

[skinnywhiteguy]

Just put my stock pipe on, got more induction noise that exhaust noise :eek:

[bandy]

Wot sort of bike you ridin' skinny?

[skinnywhiteguy]

Pookart

[Jupey]

ok i'm all set to go again and hoping to get further than the first session, have alot of new things to try out now, fully setup suspension, really sticky pirelli supercorsas and a SMR throttle.......

[TG]

I am going to head out to Lakeside for a run on Sunday. Should be a bit of fun.

[Jupey]

sweet lookin like a good turn out

[dafunk]

ready to roll
hope the weather is ok

[Bayside Burg]

i went out to have a look at Archy today. will have to have a crack!

[ozturtle]

ready to roll
hope the weather is ok

Cr80?

[ozturtle]

i went out to have a look at Archy today. will have to have a crack!

Good to see ya out there mate it's a good bit if cheap fun.

[skinnywhiteguy]

Awesome awesome day out. Thanks glen and kim and to everyone for turning up. See you all on the 30th. I'll try not to crash next time :up:

And gws Ron

[Bayside Burg]

Good to see ya out there mate it's a good bit if cheap fun.

Where you one of the guys i stopped at to say hi?

[ozturtle]

Where you one of the guys i stopped at to say hi?

Yeh I had cr80 that was playing up

[Jupey]

yeah plus one what a wicked day!! was great fun trying to keep up with everyone my bike is awesome now so much better to ride!!! cant wait for the next one should be some awesome photos there were alot of people taking them

[daffy67]

Yes i got a few pics, I'll post the better ones in the next day or so.

[Glen]

Great to meet some new faces along with all the old ones..
Another awsome day!! Thanks to everyone for playing the game during the few incidents we had..
All the best to Dafunk!!!!!! Glad to hear it wasn't a major..
I'll get my pics up tomoz..

[daffy67]

http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0139web.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0139web.jpg)
http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0135web5.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0135web5.jpg)
http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0123web3.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0123web3.jpg)
http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0080web2.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0080web2.jpg)
http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0019web4.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0019web4.jpg)

[daffy67]

http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0021jupey.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0021jupey.jpg)
http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0016berg.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0016berg.jpg)
http://i262.photobucket.com/albums/ii116/daffy67/th_IMG_0013crf1.jpg (http://s262.photobucket.com/albums/ii116/daffy67/?action=view&current=IMG_0013crf1.jpg)

[Wierus]

Awesome day! Had a blast. Hope Ron has a speedy recovery!

Got quite a few sweet photos which I will upload soonish. But got some great footage too.
I managed to capture Ron's big crash on video, and Ill upload that snippet really soon. Jupe got some great footage too, managing to catch heaps of ontrack action :)

[Jupey]

awesome stuff some good shots there hope you get well soon Ron

[Wierus]

DaFunk's Crash - YouTube

[Wierus]

i just edited it real quick. The vid on youtube is a bit choppy but you get the idea

[Jupey]

pretty good footage hope he heals up okay!

[skinnywhiteguy]

Poor bastard. Hope he's out of the cast soon!

[skinnywhiteguy]

Sore today

[danmoto]

The day looked like a success! I will def have the husky back by 30.10 so ill be at the next one! Im biting at the bit!

Looks like a good sized track for the motard eh!

Get well soon DaFunk.

[TG]

It was a good day out on the motard. A fair few guys turned up and rode.

After a couple of sessions I was starting to get my rhythm back. I had a pretty big near-highside in one session but managed (somehow) to keep it on two wheels.

Get well soon DaFunk.

[Wierus]

I went through the gopro footage. Tom, your near highside is there, along with Justins lowside. Jupey was in all the right locations! aha

Ill try get it uploaded this week :)

[TG]

Haha that should be good for a laugh.

[Jupey]

awesome cant wait to see the vid

[bandy]

Was a good day , exept for Dafunk going splat,(gotta stop that shit man)
Hope you heal up ok dude.
I had my first go at my Rmz tarded and it didn't work out to well with
no rear suspension and it's miles to low.
wound the rear clickers to no rebound and no comp and it's still way to hard.
Must have something to do with the valving from getting it all modified for dirtrack.
It was still good fun though.
Met a couple of new faces too.
Be great to see everyone out there at the end of the month again :up:

Thanks for a good day eveyone.

[Glen]

Out of the 300 odd pics I snapped these are the best ones and still not that great..

3,2,1 go..





http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4400.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4399.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4398.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4397.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4396.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4393.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4387.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4386.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4384.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4379.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4375.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4370.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4360.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4359.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4353.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4348.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4346.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4335.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4333.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4327.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4326.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4325.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4322.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4311.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4308.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4307.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4305.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4302.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4299.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4298.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4294.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4290.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4285.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4283.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4279.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4248.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4246.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4235.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4234.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4233.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4232.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4230.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4229.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4226.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4224.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4216.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4211.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4210.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4209.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4208.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4207-1.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4205.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4202.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4201.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4199.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4196.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4195.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4191.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4189.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4188.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4187.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4179.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4178.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4177.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4176.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4175.jpg

http://i126.photobucket.com/albums/p112/GSXR750K4/SWS%202nd%20Oct%202011/IMG_4174.jpg

[dafunk]

hey all
thanks for all the well wishes
on the recovery road
i wont be riding till the 24hr scoot race
big thanas to the track medics ,boys who loaded and extra big thanks to ktm rider with tarp setup who hung around till my mum n bro got there
looking for my leather top ?// anyone
was a good turn out and was awesome to catch up with rusty
cr80 went ok but pity faster atm wont take much
pit bike was on fire

[ozturtle]

Good work mate good to here your on the mend.

[rustyb59]

Get well soon rocket Ron you definitely know how to go out big mate catch up soon.

[Jupey]

um no idea on the top piece of your suit maybe Glen will know more i just loaded your gear in for ya with help from everyone else get well soon dude!

[Jupey]

the pit bike on fire was a bit of a laugh!

[skinnywhiteguy]

the pitbike on fire was awesome!!

[dafunk]

haha yeah pit bike ON fire whilst not running
found jacket thanks kim
i''ll be hanging around the computer heaps for a while
the cr has potential but its harder to ride

[Wierus]

another video:

Small Wheel Sunday - 2nd October 2011 - YouTube

[Jupey]

awesome stuff good vid!!

[skinnywhiteguy]

Awesome video!!

[MarkeeMark]

WOW! Tom got sooooooo lucky!

[Dyer]

yeah that was seriously close to going 'ouch' there.

[Daws]

Tommy G backing it out! :up:

[tkb]

Great footage Wierus & Jupey. You have inspired me.

See you on the 30th.

TKB

FS570 or
SMR525

[Jupey]

lookin forward to seeing you on the 30th mate!

[Matt57]

Tommy G backing it out! :up:

Ha ha ha. That was a good save Tom!! Recon a new pair of jocks were in order after that one8)

[dafunk]

great videos wierus!!
that corner coming onto the straight is fast !

[TG]

Ha ha ha. That was a good save Tom!! Recon a new pair of jocks were in order after that one8)

I had enough time to think "This is gonna hurt". Must've just had enough steering lock for the bike to recover. Slammed me back onto the seat pretty hard.

[skinnywhiteguy]

So who's coming out this weekend?

[ozturtle]

Lakeside or archy?

[skinnywhiteguy]

Lakeside for me

[minitard]

I should be at both, should make for a good weekend

[Jupey]

i was keen for both days but decided i'm just gunna do lakeside hope to see a good turnout like last time, lookin forward to having a good crack this time tho

[bandy]

I'll be rocking up and i know a couple of other boofs will be having there first go there
too.I reckon they'll probably go alright also.
I'll try not to chuck oil everywhere this time :D

[SM93]

i might rock up what are the costs and how will i get the exhaust quiet enough

[skinnywhiteguy]

I'll be rocking up and i know a couple of other boofs will be having there first go there
too.I reckon they'll probably go alright also.
I'll try not to chuck oil everywhere this time :D

Bringing the suzi again?

[skinnywhiteguy]

i might rock up what are the costs and how will i get the exhaust quiet enough

Jov I think it was about 70 bucks for full day riding that included day licence.

[Jupey]

yeah 70 bucks, if you have the stocky on that will be fine other than that an insert....

[Daws]

I might make a trip, just got to refit the stick exhaust to the Aprilia, fit some new slicks, add some brake fluid, change the chain, fit a new battery, change the oil, flush the radiator and blow the dust off it... It's been a while ;)

[Jupey]

awesome mate hope to see ya there

[Londin]

I'll be there on the minitard....

[bandy]

i might rock up what are the costs and how will i get the exhaust quiet enough
Mate this is the little baffle i put in the back of the RMZ muffler.
i got two so we can jam one up its date and maybe use lockwire to keep it in place
for the day(morning)
I was 89 DB , so just made it.

http://i209.photobucket.com/albums/bb30/bandym/IMG_1037.jpg

http://i209.photobucket.com/albums/bb30/bandym/IMG_1039.jpg

[Glen]

Looks like an even BIGGER turnout coming..

See you all on Sunday..

[ozturtle]

Hope to do lakeside going to do a heap to the cr80 on Saturday (lot of cutting and welding) last resort will put the sm tires on the cfr

[Jupey]

looking like a great turn out cant wait!

[danmoto]

This is killing me guys!!!! The Husky is still in the shop with the cases split! Had my fingers crossed for getting her back this week but not on the cards. :(


Up shot is the motor was about to go boom...so lucky i cought it in time with gearbox probs...now in surgery having full rebuild inc high compression piston...

Cant wait for the next one.......

[aaron690]

I'm in. My first track day so be gentle.... The SMC finally sees the track! Now to get some talent between now and tomorrow morning....

Edit: may have been premature. SMC won't idle... Changed nothing except new fuel a few days ago. Thinking dodgy batch of ultimate. Has been down on power all week. But not idling is new. It stalled on the way to work this morning but I thought (in my 'get to work rush' that I'd simply stalled it). I put another 5L of fresh ultimate in tonight in hopes it'll mix with the bad batch and be semi-rideable for tomorrow. I hope. Otherwise I'll be spending tomorrow watching :/ It runs ok, it revs ok but has a serious flat spot around 3-4k. Hopefully I'll be above that tomorrow anyway.

Fingers crossed.

After a 15min reset it's idling but still rough. Here's hoping.

[Jupey]

hell yeah tomorrows gunna be of the hook BRAAAAAAAAAP and remeber be there at around 8 to set up then riders briefing at 8:30

[Londin]

Was a good turnout today, good fun as always. Hope the guy on the Husky who got clipped is having a speedy recovery.

[Jupey]

awesome awesome day had alot of fun!! great turnout and great competition, think i was the slowest but sliding into the first turn was great fun!!!, update on luke (guy who got hit) he has 7 broken ribs :( hope he gets well soon! looking forward to the next one in two weeks!!

[SM93]

what u mean guy who got hit??

[aaron690]

Hope Luke gets well soon, as much as the guy on the CRF was racing too aggressively for his competition (yes, after reviewing the video Luke definitely got clipped on the 'bars), this is motorsport. However, my best wishes to him for a speedy recovery, the sound his helmet makes when it hits the Tarmac makes me shriek!

On a good note, it was an awesome turnout, heaps of people from SMAus and I didn't crash, which is a bonus! Thanks to all who made it fun and possible, especially for my first track day. A HUGE thanks to Brad for picking up me and my bike this morning too. And the loan of your gloves!

[SM93]

the use of phrase "racing too aggressively for his competition" scares me. u guys do realise its a just a track day right or is it actual racing now? might wait for u guys settle down a bit before gez and i head out

[ozturtle]

I think next time there will be a fast group and a dare I say it a slower group as there was a few guys that were quick and carving up the group and maybe playing a bit harder than others.

[aaron690]

It was indeed just a track day, but some were more serious than others.
I was just happy rolling around (at pace at times :p )

[SM93]

who was on the crf??

[skinnywhiteguy]

They are splitting the groups up jov. It was Adrian on the crf that clipped Luke

[Glen]

Luke's crash was a bigun and I'm really feeling for the guy.. There will definately be two groups from next track day onwards and it will be up to the individual as to what group they will run..

[aaron690]

Slow group for me :)

[Jupey]

+1 lol i really cant wait to see the footage of me backing it in, hope it looks as cool as it felt!!

[Bayside Burg]

I will come out, slow group for me to starts. Time to get the bike ready. I will withdraw the Burg from sale. I love that thing :)

[Jupey]

nice work man be good to ride out there with ya!!!

[Bayside Burg]

Will these fit anyone??

http://www.ebay.com.au/itm/290619809159?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[dafunk]

as we all know motorcycling is dangerous

speedy recovery to luke

[Jupey]

Will these fit anyone??

http://www.ebay.com.au/itm/290619809159?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

yeah mate they should fit :up:

if they dont i'll buy em for spares!

[aaron690]

It's not as good as you might think. The wide angle of the GoPro meant that it happens too far in the distance. Can see F' all... As soon as I can I'll put as much of the complete videos as I can on Vimeo. You might all have to give me a few days to get them compressed and edited.

I'll put up a few shots tho from the videos.... Give me half an hour.

[aaron690]

Scrap that.. For those of you that are on my fb I'll post them there from the iPad on 3G. Home network seems to not want to work... Anyone else feel free to ad me, there is several shots of other riders

[Wierus]

Hey Guys!
Luke is very appreciative of all the support, as am I. Thank you all soo so much for helping me load the ute/trailer so bloody quick! Was amazing.
It looks like he will be in hospital for a couple of days at least. There are at least 6, possibly 7 broken ribs, some of which are overlaying. There is also a chance that some of the broken ribs have done some other internal damage, but we dont have confirmation on that yet! He also chipped the C2(i think?) vertebrae but the doc isnt worried about it at all.
He is a bit sore and sorry, but theyve got him on a truckload of pain meds and its being managed really well.
The bike, amazingly is really really good... The sliders etc did the job! Wasnt any damage to the bikes plastics, wheels, brakes. The left barkbuster is wrecked, but its just plastic. The metal bar end looks fine. The bars dont even really feel bent... wtf?!

Jovian: It was just the one fella that was alot faster than the rest of us, and he was just a tad too aggressive on a track littered with novice riders. Its my understanding that he has clipped my brothers handlebars and its forced him to hit the deck. He could have made a really safe and clean pass on the straight after turn one without incident. Its just a friendly track day, not a race. Just a little bit more common sense was require I think.

Its a shame for sure for us to have ended our really fun day on a bad note!

[dafunk]

yeah its just a track day no need for it to be more dangerous

[SM93]

that sucks josh, hopefully the dude tones it down in the future. was he a racer?

[Bayside Burg]

Whens the next one??

Just bid on the peg sliders..Now i need to figure out how to get her quiet??

[Wierus]

Im not totally sure, with his speed I would assume so.

[skinnywhiteguy]

2 weeks bayside. There is a link to the sws page somewhere in earlier pages, they on facebook too.

[Glen]

Link is in my Sig..

[BB63]

Some crappy pics that I took today.

http://i20.photobucket.com/albums/b215/BB63/Lakeside301011041.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside301011038.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside301011030.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside301011017.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside301011016.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside301011008.jpg

http://i20.photobucket.com/albums/b215/BB63/Lakeside301011001.jpg
Cheers Brian

[SM93]

jupey what is going on with the rear of ur bike looks like u just flat landed a jump???

[Dyer]

jupey what is going on with the rear of ur bike looks like u just flat landed a jump???

lol its probably that gay PDS stuff. i dont understand it but you have to set them up with more race sag than normal from memory???

[aaron690]

Woot! I made it into one, not running wide at all lol

[Jupey]

jupey what is going on with the rear of ur bike looks like u just flat landed a jump???


hmmmmmm just noticed myself........ the bike is all set up properly for motard now, it feels fantastic and never have a problem with it but judging by that maybe i need to do some adjustments, dont want to screw it up tho might wait till i am out there next and get someone with a bit of expereience to give me a hand:roll:

[Jupey]

the 4th guy in the last photo is the rider who was involved in Luke's off

[Jupey]

Whens the next one??

Just bid on the peg sliders..Now i need to figure out how to get her quiet??

get a quiet insert:up:

[TG]

It looks like he will be in hospital for a couple of days at least. There are at least 6, possibly 7 broken ribs, some of which are overlaying. There is also a chance that some of the broken ribs have done some other internal damage, but we dont have confirmation on that yet! He also chipped the C2(i think?) vertebrae but the doc isnt worried about it at all.
He is a bit sore and sorry, but theyve got him on a truckload of pain meds and its being managed really well.


Wish him all the best from me please Josh. He must've hit the deck pretty hard.

[aaron690]

Here you go guys. The rest of the videos are still pending but this is Luke's big off.
http://vimeo.com/31364002

EDIT: Teaser added
http://vimeo.com/31364176

EDIT: Final render added.
Several mistakes in the video, but because the camera was set too low I haven't bothered doing an uber flash version of it.
Worth watching all the same. Sorry Jupey, the footage isn't good enough to see your slide :(
http://vimeo.com/31365183

[Jupey]

haha loven the teaser!!

[Wierus]

Crash was nasty. But the teaser vid made me chuckle pretty hard! Thanks Aaron. Nice work :D

[aaron690]

All vids up in my previous post. I have a bunch of video from Sunday (4.5Gb), if anyone would like it to go thru let me know and I'll burn you a dvd.

Cheers AJ

[danmoto]

Loving the Teasr vid Aaron...Very Pro!! Weirus, send my best to Josh, hope him a speedy recover.Looks to be an unfortunate misadventure... Howmany bikes out in total....

Bayside Berg whats this about selling up? Only if your gunna buy a Husky!

Im in for 2 weeks time! Fingers crossed! Maybe this thread should be renamed "Lakeside"?

[Greeny]

Great Vids.

That teaser is good!
Makes me wanna go riding.

[danmoto]

Excellent Production Quality... Did you miss your calling? :)

[aaron690]

Looks like everyone likes the teaser best lol
So with help I've discovered that the camera angle was actually ok, but the import/export process of the video has cut it down. So, having said that, I'm going to redo both the teaser and the full video and update them later in the week, hopefully with the correct footage. Just gotta figure out why it did it.

Cheers for the comments.

[Londin]

I have a video from Sunday as well...but after seeing what Arron has made then this sucks...
But if you want to wast some time


here you go:
Minitard Lakeside 30-10-2011 - YouTube

On a different note...GPS was showing 104.45km/h down the straight on the minitard, need to mount it on one of the bike once to see what top you nut cases get!



.oO(Better get myself a GoPro HD:roll:...and a better mounting point)

[aaron690]

Interesting perspective from a mini-bike!! You guys hit some pretty serious lean angles...
Yeah I love the GoPro HD. Had it for years, it's been through a few crashes and still works perfect every time.

[aaron690]

Excellent Production Quality... Did you miss your calling? :)

Haha thanks mate. I'm not that good, I only dabble every now and then. It's only about the 2nd lot of vids I've done. The iMac makes it pretty easy...

[Londin]

Interesting perspective from a mini-bike!! You guys hit some pretty serious lean angles...
Yeah I love the GoPro HD. Had it for years, it's been through a few crashes and still works perfect every time.

So yours is a GoPro HD, thought it was a GoPro Hero2...wonder how got that would be! Properly only real good if you blow the picture big up! The 'standard' HD GoPro goes pretty cheap!
http://www.hdactioncamera.com.au/hd-helmet-hero-wide/

[aaron690]

Mine is the Motorsport Hero HD 1080p
So not the first 720p go pro, but the full 1080p one. The vids I put up were recorded in 960p @ 30 fps but uploaded in 720p @ 30fps. Don't have a big enough SD Card to do a full day of 1080p.

I think the Hero 2 just has a better lens. Still records in. The same formats and qualities.

This is mine: http://www.hdactioncamera.com.au/hd-motorsports-hero-wide/

[danmoto]

Thats good footage too Londin.... yeah those mini motards are the madness :) . I have a few mates with good camera gear, if i make it to the next one in 2 weeks ill see if i can get one of em along to take some shots! They ride bikes too so shouldnt be to hard to convince them.....

[skinnywhiteguy]

Next ones 13th November. Who's in? I need a faster bike...atleast I want a faster bike

[Jupey]

great vids aaron!! nice work, will try and get there for the 13th depending on money

[aaron690]

Next ones 13th November. Who's in? I need a faster bike...atleast I want a faster bike

Yep, I'm in for the 13th if I can get someone to take me and my bike out there again. Anyone on the south side can help, I'm not biased to any one person lol. I'll even buy you a six-pack!

great vids aaron!! nice work, will try and get there for the 13th depending on money

Cheers Nick

[bandy]

What a bummer i missed it .Looks like you all had an awsome day exept Luke.
Heal up well dude , the place took me out of action for a couple of months once,uncool shit.
I was busy early sunday morning pushing vomit down the shower plug ole so thought it
was in my best interest to go back to bed or i may well of binned it too.
Catch yas on the 13th.
Two groups i hear hey.

[Glen]

the place took me out of action for a couple of months once,uncool shit.

Mal Takes a Tumble - YouTube

[danmoto]

Yep, I'm in for the 13th if I can get someone to take me and my bike out there again. Anyone on the south side can help, I'm not biased to any one person lol. I'll even buy you a six-pack!

Cheers Nick

If you supply the trailer i can help.:D:D:D I just sold my trailer to help pay for my huskys surgery.

Bike fits in the back of my Troopy so no real need for a trailer..... Im in Bulimba. :up:

[aaron690]

If you supply the trailer i can help.:D:D:D I just sold my trailer to help pay for my huskys surgery.

Bike fits in the back of my Troopy so no real need for a trailer..... Im in Bulimba. :up:

I sold my trailer when I moved up here :(
Should have kept it by the looks. Didn't think I was going to get into track days....

[danmoto]

Bummer Dude. Cant help the allure of a good track day!

[aaron690]

May not be riding at the next lakeside day guys and girls...
690 has a stalling issue. It's either fuel pump, injector or tps/eps sensors.
Going in for diags next week. While its there (if I survive the cost of parts) it'll be getting some power parts bling too. However! If I can't ride I'll be out there to watch/help out anyway if I'm needed.

[Londin]

Glen did you have any photos of us on the minitards?

[ozturtle]

Looks like the failure on the cr was a little worse than first thought. The estimated repair bill costs are mounting so it may be pushed to the back of the shed for a bit till funds come available. That said I'm out for at least a month or two.

[danmoto]

Feel your pain Oz Turtle. All going well ill have mine back next week after about 2 months! Just miss her so much!

Youll be right mate. :)

[ozturtle]

Looks like a new Big end kit, resleve, piston kit. It looks like if I go ahead with it, it will almost double the total cost of the bike so far.

[Glen]

Glen did you have any photos of us on the minitards?

I did, I'll get them on the Faysebook or something soonish.

[rustyb59]

hey aaron we just replaced a fuel pump on a duke recently and are doing a lot of fuel pumps lately hopefully its not major like that.give me a bell on ext 2950 for any more info.

[aaron690]

hey aaron we just replaced a fuel pump on a duke recently and are doing a lot of fuel pumps lately hopefully its not major like that.give me a bell on ext 2950 for any more info.

You're at Moorooka? Thought you were at Virginia?

Hmm, my fuel pump should still be under warranty if they are still running the same warranty thing. It's been replaced before and, for memory, replaced parts carry a 2yr warranty even if the bike is out of warranty...? Correct me if I'm wrong, but that was the case when I was doing KTM parts. And if that is case, my dash might need doing AGAIN soon also. I've got monday off and no way of getting back from Moorooka so on Tuesday I'll persevere with it and get it to work, then put it on the truck to get it over there.

[rustyb59]

nah im at virginia running the service department dunno about 2year warranty on parts pretty sure its 30 days if the bikes warranty has expired but if its still under warranty then they should hopefully be able to claim under warranty parts should be available

[Londin]

Arron.....maybe this should be your next angle for the next video:
http://www.supermotard.dk/vivid-supermoto-angles-ride-video/

My mate back in DK made this, not only is he fast, he comes up with some good ideas, check out his flattrack bike as well!

[danmoto]

Did you guys get out to Lakeside last week? What is the frequency of the meets? assuming another 2 weeks?

[Jupey]

next one is the 11th of december didnt get to the one last weekend

[danmoto]

Hope to see yo there Jup! Thanks for the heads up!

[aaron690]

Arron.....maybe this should be your next angle for the next video:
http://www.supermotard.dk/vivid-supermoto-angles-ride-video/

My mate back in DK made this, not only is he fast, he comes up with some good ideas, check out his flattrack bike as well!

I love the video, might give something like that a go. I've also got a Gorilla Pod stand to mount somewhere on the track next time. Maybe inside turn 1 or something tight. Also thinking of getting a contour to run with the GoPro having one on the bike and another on the track somewhere so I can run overlays etc. See how I go for cash. It turns out doing videos doesn't come cheap and as far as hobbies go this one is getting expensive fast. But everyone is hounding me for another video :/

[danmoto]

I love the video, might give something like that a go. .......... It turns out doing videos doesn't come cheap and as far as hobbies go this one is getting expensive fast. But everyone is hounding me for another video :/

Mate it seems like this is an inevitable problem derived by having excellent video production skills.... Ill shout you a beer to ease the pain if that will help:D:D

[daffy67]

Got some long overdue repairs to get done on CRF on Saturday so I may not be financial for the ride on Sunday.
However I'll still pop out for the event.

[aaron690]

Yeah I won't be riding either, but I'll go out there for a BBQ and to say merry ho ho to everyone